hrcak mascot   Srce   HID

Prethodno priopćenje

Application of Finite Element Method (FEM) for definition of the relationship between properties of laser alloyed steel surface layer

A. Śliwa ; Silesian University of Technology, Institute of Engineering Materials and Biomaterials, Gliwice, Poland
M. Bonek ; Silesian University of Technology, Institute of Engineering Materials and Biomaterials, Gliwice, Poland

Puni tekst: engleski, pdf (193 KB) str. 223-225 preuzimanja: 384* citiraj
APA 6th Edition
Śliwa, A. i Bonek, M. (2017). Application of Finite Element Method (FEM) for definition of the relationship between properties of laser alloyed steel surface layer. Metalurgija, 56 (1-2), 223-225. Preuzeto s https://hrcak.srce.hr/168946
MLA 8th Edition
Śliwa, A. i M. Bonek. "Application of Finite Element Method (FEM) for definition of the relationship between properties of laser alloyed steel surface layer." Metalurgija, vol. 56, br. 1-2, 2017, str. 223-225. https://hrcak.srce.hr/168946. Citirano 29.01.2020.
Chicago 17th Edition
Śliwa, A. i M. Bonek. "Application of Finite Element Method (FEM) for definition of the relationship between properties of laser alloyed steel surface layer." Metalurgija 56, br. 1-2 (2017): 223-225. https://hrcak.srce.hr/168946
Harvard
Śliwa, A., i Bonek, M. (2017). 'Application of Finite Element Method (FEM) for definition of the relationship between properties of laser alloyed steel surface layer', Metalurgija, 56(1-2), str. 223-225. Preuzeto s: https://hrcak.srce.hr/168946 (Datum pristupa: 29.01.2020.)
Vancouver
Śliwa A, Bonek M. Application of Finite Element Method (FEM) for definition of the relationship between properties of laser alloyed steel surface layer. Metalurgija [Internet]. 2017 [pristupljeno 29.01.2020.];56(1-2):223-225. Dostupno na: https://hrcak.srce.hr/168946
IEEE
A. Śliwa i M. Bonek, "Application of Finite Element Method (FEM) for definition of the relationship between properties of laser alloyed steel surface layer", Metalurgija, vol.56, br. 1-2, str. 223-225, 2017. [Online]. Dostupno na: https://hrcak.srce.hr/168946. [Citirano: 29.01.2020.]

Sažetak
Investigations include FEM simulation model of alloying the PMHSS6-5-3 steel surface layer with the carbides and ceramic powders, especially WC, VC, TiC, SiC, Si3N4 and Al2O3 particles using the high power diode laser (HPDL). The FEM computations were performed using ANSYS software. The scope of FEM simulation was determination of temperature distribution during laser alloying process at various process configurations regarding laser beam power and method of powder deposition, as pre coated past or surface with machined grooves. The FEM simulation allows specifying the heat affected zone and the temperature distribution in the sample as a function of time and thus allows the estimation of the structural changes taking place during laser alloying process.

Ključne riječi
high-speed tool steel; temperature; computer simulation; FEM, laser remelting

Hrčak ID: 168946

URI
https://hrcak.srce.hr/168946

Posjeta: 471 *