APA 6th Edition Antabak, A., Brajčinović, M., Bradić, L., Barišić, B., Andabak, M., Halužan, D., ... Prlić, I. (2016). EGZOTERMNA REAKCIJA SADRENJA – ANALIZA TRIJU VRSTA SADRENIH ZAVOJA. Liječnički vjesnik, 138 (9-10), 0-0. Preuzeto s https://hrcak.srce.hr/172886
MLA 8th Edition Antabak, Anko, et al. "EGZOTERMNA REAKCIJA SADRENJA – ANALIZA TRIJU VRSTA SADRENIH ZAVOJA." Liječnički vjesnik, vol. 138, br. 9-10, 2016, str. 0-0. https://hrcak.srce.hr/172886. Citirano 21.02.2020.
Chicago 17th Edition Antabak, Anko, Melita Brajčinović, Lucija Bradić, Branimir Barišić, Matej Andabak, Damir Halužan, Nino Fuchs, et al. "EGZOTERMNA REAKCIJA SADRENJA – ANALIZA TRIJU VRSTA SADRENIH ZAVOJA." Liječnički vjesnik 138, br. 9-10 (2016): 0-0. https://hrcak.srce.hr/172886
Harvard Antabak, A., et al. (2016). 'EGZOTERMNA REAKCIJA SADRENJA – ANALIZA TRIJU VRSTA SADRENIH ZAVOJA', Liječnički vjesnik, 138(9-10), str. 0-0. Preuzeto s: https://hrcak.srce.hr/172886 (Datum pristupa: 21.02.2020.)
Vancouver Antabak A, Brajčinović M, Bradić L, Barišić B, Andabak M, Halužan D i sur. EGZOTERMNA REAKCIJA SADRENJA – ANALIZA TRIJU VRSTA SADRENIH ZAVOJA. Liječnički vjesnik [Internet]. 2016 [pristupljeno 21.02.2020.];138(9-10):0-0. Dostupno na: https://hrcak.srce.hr/172886
IEEE A. Antabak, et al., "EGZOTERMNA REAKCIJA SADRENJA – ANALIZA TRIJU VRSTA SADRENIH ZAVOJA", Liječnički vjesnik, vol.138, br. 9-10, str. 0-0, 2016. [Online]. Dostupno na: https://hrcak.srce.hr/172886. [Citirano: 21.02.2020.]
Sažetak Exothermic reaction of plaster is a very important characteristic to understand, especially when it comes to complications which can occur during local temperature change during molding plaster of Paris. And these complications directly influence the speed and quality of treatment. In this paper we measured temperatures of plaster bandage tiles 10×10 cm, from three different manufacturers in Croatian hospitals: Safix plus (Hartmann, Germany), Cellona (Lohmann &Rauscher, Austria) and Gipsan ( Ivo Lola Ribar, Croatia). We made three different plaster tiles 10×10 cm, from 10, 15 and 30 layers of plaster bandages. We immersed plaster tiles in two different water temperatures, one group in water 22 °C, and another in 34 °C. Although all plaster bandages have similar chemical characteristics, we have measured some differences. All three kinds of plaster bandages used in Croatia have low exothermic reaction when plaster molding is done in standard conditions, average local temperature is low and there is no danger of local burns. We immersed a plaster tile with 15 layers in water on 34° C, and highest average temperature was measured at Gipsan (46.2 °C), then Cellona (41.3 °C) and Safix plus (38.9 °C). On the same water immersion temperature, on plaster tile with 30 layers average temperatures were Gipsan (48.4°C), Cellona (45.4 °C), and lowest in Safix plus (41.3 °C). Plaster tiles form all manufacturers, when used 15-30 layers thick, and water immersion temperature is 34°C, develop average temperature over 40°C, in duration from 8-12 minutes. Between three different plaster bandages analyzed, Gipsan (Ivo Lola Ribar, Croatia) developed highest temperature, and some plaster tiles were measured over 50 °C.