Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.5552/drind.2017.1617

Chemical and Physical Properties of Pine Wood during Pyrolysis

Karol Ronewicz ; Institut za hidraulične strojeve, Poljska akademija znanosti, Gdansk, Poljska
Jacek Kluska ; Institut za hidraulične strojeve, Poljska akademija znanosti, Gdansk, Poljska
Łukasz Heda ; Institut za hidraulične strojeve, Poljska akademija znanosti, Gdansk, Poljska
Dariusz Kardaś ; Institut za hidraulične strojeve, Poljska akademija znanosti, Gdansk, Poljska


Puni tekst: engleski pdf 679 Kb

str. 29-36

preuzimanja: 1.760

citiraj


Sažetak

This paper examines the influence of temperature on several physical properties of wood. The results demonstrated that devolatilization during pyrolysis greatly affects the inner structure of wood, followed by changes in volume, mass, density and shape. The research showed that a decrease in wood density caused a significant increase in permeability. Data on pyrolytic gases, char composition and calorific value measurements of these products are also presented. The results showed that the lower heating value (LHV) of pyrolytic gas can reach 12 MJ/Nm3 at 600 °C and the higher heating value (HHV) of char can reach 34 MJ/kg for 700 °C. The analysis of the calorific values of pyrolytic gases and char showed that the thermal conversion of biomass can lead to the generation of good quality gaseous and solid fuels.

Ključne riječi

pyrolysis; pine wood; wood permeability; wood density; pyrolysis gas; thermogravimetric analysis

Hrčak ID:

178651

URI

https://hrcak.srce.hr/178651

Datum izdavanja:

30.3.2017.

Podaci na drugim jezicima: hrvatski

Posjeta: 2.888 *