hrcak mascot   Srce   HID

Tehnički vjesnik, Vol. 24 No. Supplement 1, 2017.

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20131221170237

The effect of feed rate on durability and wear of exchangeable cutting inserts during cutting Ni-625

Jana Petrů ; VŠB - Technical University of Ostrava, 17. listopadu 15/2172, 708 33 Ostrava - Poruba, Czech Republic
Tomáš Zlámal ; VŠB - Technical University of Ostrava, 17. listopadu 15/2172, 708 33 Ostrava - Poruba, Czech Republic
Robert Čep ; VŠB - Technical University of Ostrava, 17. listopadu 15/2172, 708 33 Ostrava - Poruba, Czech Republic
Marek Sadílek   ORCID icon orcid.org/0000-0001-6680-6865 ; VŠB - Technical University of Ostrava, 17. listopadu 15/2172, 708 33 Ostrava - Poruba, Czech Republic
Dana Stančeková ; Faculty of Mechanical Engineering of University of Zilina, Department of Machining and Manufacturing Technology, Univerzitna 1, 010 26 Zilina, Slovak Republic

Puni tekst: engleski, pdf (2 MB) str. 1-6 preuzimanja: 477* citiraj
APA 6th Edition
Petrů, J., Zlámal, T., Čep, R., Sadílek, M. i Stančeková, D. (2017). The effect of feed rate on durability and wear of exchangeable cutting inserts during cutting Ni-625. Tehnički vjesnik, 24 (Supplement 1), 1-6. https://doi.org/10.17559/TV-20131221170237
MLA 8th Edition
Petrů, Jana, et al. "The effect of feed rate on durability and wear of exchangeable cutting inserts during cutting Ni-625." Tehnički vjesnik, vol. 24, br. Supplement 1, 2017, str. 1-6. https://doi.org/10.17559/TV-20131221170237. Citirano 01.03.2021.
Chicago 17th Edition
Petrů, Jana, Tomáš Zlámal, Robert Čep, Marek Sadílek i Dana Stančeková. "The effect of feed rate on durability and wear of exchangeable cutting inserts during cutting Ni-625." Tehnički vjesnik 24, br. Supplement 1 (2017): 1-6. https://doi.org/10.17559/TV-20131221170237
Harvard
Petrů, J., et al. (2017). 'The effect of feed rate on durability and wear of exchangeable cutting inserts during cutting Ni-625', Tehnički vjesnik, 24(Supplement 1), str. 1-6. https://doi.org/10.17559/TV-20131221170237
Vancouver
Petrů J, Zlámal T, Čep R, Sadílek M, Stančeková D. The effect of feed rate on durability and wear of exchangeable cutting inserts during cutting Ni-625. Tehnički vjesnik [Internet]. 2017 [pristupljeno 01.03.2021.];24(Supplement 1):1-6. https://doi.org/10.17559/TV-20131221170237
IEEE
J. Petrů, T. Zlámal, R. Čep, M. Sadílek i D. Stančeková, "The effect of feed rate on durability and wear of exchangeable cutting inserts during cutting Ni-625", Tehnički vjesnik, vol.24, br. Supplement 1, str. 1-6, 2017. [Online]. https://doi.org/10.17559/TV-20131221170237
Puni tekst: hrvatski, pdf (2 MB) str. 1-6 preuzimanja: 204* citiraj
APA 6th Edition
Petrů, J., Zlámal, T., Čep, R., Sadílek, M. i Stančeková, D. (2017). Učinak brzine posmaka na trajnost i trošenje izmjenljivih pločica tijekom rezanja Ni-625. Tehnički vjesnik, 24 (Supplement 1), 1-6. https://doi.org/10.17559/TV-20131221170237
MLA 8th Edition
Petrů, Jana, et al. "Učinak brzine posmaka na trajnost i trošenje izmjenljivih pločica tijekom rezanja Ni-625." Tehnički vjesnik, vol. 24, br. Supplement 1, 2017, str. 1-6. https://doi.org/10.17559/TV-20131221170237. Citirano 01.03.2021.
Chicago 17th Edition
Petrů, Jana, Tomáš Zlámal, Robert Čep, Marek Sadílek i Dana Stančeková. "Učinak brzine posmaka na trajnost i trošenje izmjenljivih pločica tijekom rezanja Ni-625." Tehnički vjesnik 24, br. Supplement 1 (2017): 1-6. https://doi.org/10.17559/TV-20131221170237
Harvard
Petrů, J., et al. (2017). 'Učinak brzine posmaka na trajnost i trošenje izmjenljivih pločica tijekom rezanja Ni-625', Tehnički vjesnik, 24(Supplement 1), str. 1-6. https://doi.org/10.17559/TV-20131221170237
Vancouver
Petrů J, Zlámal T, Čep R, Sadílek M, Stančeková D. Učinak brzine posmaka na trajnost i trošenje izmjenljivih pločica tijekom rezanja Ni-625. Tehnički vjesnik [Internet]. 2017 [pristupljeno 01.03.2021.];24(Supplement 1):1-6. https://doi.org/10.17559/TV-20131221170237
IEEE
J. Petrů, T. Zlámal, R. Čep, M. Sadílek i D. Stančeková, "Učinak brzine posmaka na trajnost i trošenje izmjenljivih pločica tijekom rezanja Ni-625", Tehnički vjesnik, vol.24, br. Supplement 1, str. 1-6, 2017. [Online]. https://doi.org/10.17559/TV-20131221170237

Sažetak
This paper deals with the process of cutting of nickel superalloy and selection of suitable cutting parameters for its easy and effective cutting. The experimental part proposes three exchangeable inserts and determines the effect of feed rate cutting parameter during machining on durability and wear of the cutting tool. Depending on selected cutting feed rate and the amount of wear of these exchangeable cutting inserts, the quality of turned surface is evaluated and height roughness parameters are determined. In closing we show our observations obtained while machining Inconel 625, determine the effect of feed rate on durability and wear of cutting inserts, evaluate and recommend practical steps, describe the mechanisms of cutting wedge wear, determine the durability of the tool and roughness of the turned surface.

Ključne riječi
cutting; durability; exchangeable cutting inserts; flank wear; nickel superalloy

Hrčak ID: 181234

URI
https://hrcak.srce.hr/181234

[hrvatski]

Posjeta: 1.074 *