Izvorni znanstveni članak
Static and dynamic rectangular finite elements for plate vibration analysis
Ivo Senjanović
; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, CROATIA
Marko Tomić
; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, CROATIA
Neven Hadžić
; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, CROATIA
Nikola Vladimir
; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Zagreb, CROATIA
Sažetak
Nowadays dynamic finite elements with frequency dependent unified stiffness matrix are considered in order to reduce finite element mesh density, and, consequently, system of algebraic equations in eigenvalue formulation. In this paper, an attempt to develop a 4-noded rectangular finite element for thin plate bending is presented. Since there is no simple general analytical solution of plate vibrations for arbitrary boundary conditions, dynamic shape functions are assumed as products of beam shape functions in longitudinal and transverse direction. Dynamic finite element with frequency dependent stiffness and mass matrix is derived by energy approach. Convergence of results is checked and it is found that such finite element formulation is not suitable for wider use. Therefore, strip finite element for vibration analysis of rectangular plate with simply supported two opposite edges is developed, which gives exact results. Application of both finite elements is illustrated by several numerical examples.
Ključne riječi
thin plate; dynamic finite elements; rectangular element; strip element; dynamic stiffness and mass matrix
Hrčak ID:
184379
URI
Datum izdavanja:
22.12.2016.
Posjeta: 516 *