Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.15255/CABEQ.2016.894

Catalytic Reactive Distillation for the Esterification Process: Experimental and Simulation

M. Mallaiah ; Department of Chemical Engineering, BV Raju Institute of Technology, Narsapur, 502313, India
K. A. Kishore ; Department of Chemical Engineering, National Institute of Technology, Warangal, 506004, India
G. V. Reddy ; Department of Chemical Engineering, National Institute of Technology, Warangal, 506004, India


Puni tekst: engleski pdf 1.289 Kb

str. 293-302

preuzimanja: 1.473

citiraj


Sažetak

In the present study, methyl acetate has been synthesized using esterification of acetic acid with methanol in a continuous packed bed catalytic reactive distillation column in the presence of novel Indion 180 ion exchange resin solid catalyst. The experiments were conducted at various operating conditions like reboiler temperature, reflux ratio, and different feed flow rates of the acetic acid and methanol. The non-ideal pseudo-homogeneous kinetic model has been developed for esterification of acetic acid with methanol in the presence of Indion 180 catalyst. The developed kinetic model was used for the simulation of the reactive distillation column for the synthesis of methyl acetate using equilibrium stage model in Aspen Plus version 7.3. The simulation results were compared with experimental results, and found that there is a good agreement between them. The sensitivity analyses were also carried out for the different parameters of bottom flow rate, feed temperatures of acetic acid and methanol, and feed flow rate of acetic acid and methanol.







This work is licensed under a Creative Commons Attribution 4.0 International License.

Ključne riječi

catalyst; esterification; reactive distillation; reflux ratio; mathematical model; simulation

Hrčak ID:

187140

URI

https://hrcak.srce.hr/187140

Datum izdavanja:

4.10.2017.

Posjeta: 2.118 *