Izvorni znanstveni članak
https://doi.org/10.5599/jese.458
Graphene-modified nickel foam electrode for cathodic degradation of nitrofuranzone: Kinetics, transformation products and toxicity
Ya Ma
; College of Materials Science and Engineering, Hunan University, Changsha 410082, P. R. China
Yanhong Tang
; College of Materials Science and Engineering, Hunan University, Changsha 410082, P. R. China
Kai Yin
; State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082, P. R. China
Shenglian Luo
; 2State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082, P. R. China
Chengbin Liu
; 2State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082, P. R. China
Tian Liu
; 2State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082, P. R. China
Liming Yang
; 2State Key Laboratory of Chemo/Biosensing and Chemometrics, Hunan University, Changsha 410082, P. R. China
Sažetak
Simple, efficient, and durable electrodes are highly demanded for practical electrochemical process. In this study, a reduced graphene oxide modified nickel foam electrode (GR-Ni foam) was facilely prepared via one-step cyclic voltammetry electrodeposition of graphene oxide suspension onto the Ni foam. The electrochemical degradation of nitrofuranzone (NFZ, a kind of typical antibiotics) was studied on the GR-Ni foam cathode. The cyclic voltammetry and electrochemical impedance spectra analysis confirmed that presence of GR loading accelerated the electron transfer from the cathode surface to NFZ. With the applied cathode potential of −1.25 V (vs. Ag/AgCl), the removal efficiency of NFZ (C0 = 20 mg L−1) at the GR-Ni foam electrode reached up to 99 % within 30 min, showing a higher reaction rate constant (0.1297 min−1) than 0.0870 min−1 at the Pd-Ni foam and 0.0186 min−1 at the Ni foam electrode. It was also found that the pH, dissolved oxygen and NFZ initial concentration have slight effect on NFZ degradation at the GR-Ni foam electrode. The reactions first occurred at nitro groups (-NO2), unsaturated C=N bonds and N-N bonds to generate furan ring-containing products, and then these products were transformed into linear diamine products. The direct reduction by electrons was mainly responsible for NFZ reduction at the GR-Ni foam electrode. Even after 18 cycles, the removal efficiency of NFZ still reached up to 98 % within 1 h. In addition, the cathodic degradation process could eliminate the antibacterial activity of NFZ. The GR-Ni foam electrode would have a great potential in electrochemical process for treating wastewater containing furan antibiotics.
Ključne riječi
Graphene; Nickel foam; Nitrofuranzone; Electrochemical degradation
Hrčak ID:
191444
URI
Datum izdavanja:
24.12.2017.
Posjeta: 1.015 *