hrcak mascot   Srce   HID

Drvna industrija : Scientific journal of wood technology, Vol. 68 No. 4, 2017

Original scientific paper
https://doi.org/10.5552/drind.2017.1633

Coatings for Use on Wooden Bicycle Frames – Applicability, Test Methods and Artificial Weathering Results

Fabian Wulf ; Eberswalde University for Sustainable Development - University of Applied Sciences, Faculty of Wood Science and Technology, Eberswalde, Germany
Moritz Sanne ; Eberswalde University for Sustainable Development - University of Applied Sciences, Faculty of Wood Science and Technology, Eberswalde, Germany
Alexander Pfriem   ORCID icon orcid.org/0000-0001-6999-6182 ; Eberswalde University for Sustainable Development - University of Applied Sciences, Faculty of Wood Science and Technology, Eberswalde, Germany

Fulltext: english, pdf (581 KB) pages 281-289 downloads: 147* cite
APA 6th Edition
Wulf, F., Sanne, M. & Pfriem, A. (2017). Coatings for Use on Wooden Bicycle Frames – Applicability, Test Methods and Artificial Weathering Results. Drvna industrija, 68 (4), 281-289. https://doi.org/10.5552/drind.2017.1633
MLA 8th Edition
Wulf, Fabian, et al. "Coatings for Use on Wooden Bicycle Frames – Applicability, Test Methods and Artificial Weathering Results." Drvna industrija, vol. 68, no. 4, 2017, pp. 281-289. https://doi.org/10.5552/drind.2017.1633. Accessed 24 Feb. 2019.
Chicago 17th Edition
Wulf, Fabian, Moritz Sanne and Alexander Pfriem. "Coatings for Use on Wooden Bicycle Frames – Applicability, Test Methods and Artificial Weathering Results." Drvna industrija 68, no. 4 (2017): 281-289. https://doi.org/10.5552/drind.2017.1633
Harvard
Wulf, F., Sanne, M., and Pfriem, A. (2017). 'Coatings for Use on Wooden Bicycle Frames – Applicability, Test Methods and Artificial Weathering Results', Drvna industrija, 68(4), pp. 281-289. doi: https://doi.org/10.5552/drind.2017.1633
Vancouver
Wulf F, Sanne M, Pfriem A. Coatings for Use on Wooden Bicycle Frames – Applicability, Test Methods and Artificial Weathering Results. Drvna industrija [Internet]. 2017 [cited 2019 February 24];68(4):281-289. doi: https://doi.org/10.5552/drind.2017.1633
IEEE
F. Wulf, M. Sanne and A. Pfriem, "Coatings for Use on Wooden Bicycle Frames – Applicability, Test Methods and Artificial Weathering Results", Drvna industrija, vol.68, no. 4, pp. 281-289, 2017. [Online]. doi: https://doi.org/10.5552/drind.2017.1633

Abstracts
Seven different coating systems were tested regarding their suitability for application on bicycle frames made of wood. Since bicycles are ridden throughout the year, the coating system has to withstand different outdoor climate conditions and, especially in winter, the salt brines from the roads. For this reason, an artificial weathering test with an additional freezing step was performed, followed by a specially developed salt brine spray test in ambient outdoor winter climate. Another focus was on the applicability of the coatings. For the tests, a range of coatings, originally developed for wooden front doors, floors and for boat building, was selected. These coatings were expected to meet the main requirements for UV radiation - permanence, weather resistance and saltwater firmness. The main constituents of the coatings were water-based polymer dispersions, two-component polyurethane systems or synthetic and natural oils. The layer thicknesses of the coatings, as well as colour and gloss data of the specimens, were recorded and rated. The adhesion capability was examined by carrying out a cross-cut-test. Surface damages were observed visually. It turned out that colour and gloss change served as good indicators for the decay of the coating. Three different coatings passed the accelerated weathering test. Salt spray had no significant effect on any of the coatings.

Keywords
wooden bicycle; wood coating; durability; artificial weathering; salt spray

Hrčak ID: 191938

URI
https://hrcak.srce.hr/191938

[croatian]

Visits: 245 *