Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.5552/drind.2017.1719

The Effect of Heat Modification and Densification on Physical Properties of Poplar Wood

Gonca Düzkale Sözbir ; Odjel za inženjerstvo proizvoda od drva, Šumarski fakultet, Sveučilište Kahramanmaras Sutcu Imam, Kahramanmaras, Turska
İbrahim Bektaş Bektaş ; Odjel za inženjerstvo proizvoda od drva, Šumarski fakultet, Sveučilište Kahramanmaras Sutcu Imam, Kahramanmaras, Turska


Puni tekst: engleski pdf 191 Kb

str. 315-321

preuzimanja: 771

citiraj


Sažetak

In this study, density, volumetric swelling, mass loss, volume weight, fiber saturation point and water absorption of the poplar wood (Populus usbekistanica) were investigated with the effect of heat modification (HM) and heat-modifi ed densifi cation (HMD). Poplar samples were modified with steam at 120 °C, 160 °C and 200 °C for 1 and 3 h. After heat modification, the samples were compressed in hot press at a temperature of 120 °C, press pressure of 5 MPa and press time of 30 minutes for densification. Physical properties of the samples were determined according to Turkish standards. The results showed that heat modification affected densification and increased density. Densification had a positive effect on oven dry density (D0), oven dry density after soaking (D0S), volume weight (R) and fi ber saturation point (FSP), except for volumetric swelling. Similarly, the densification process had an increasing effect on the water absorption, excluding 360 hours.

Ključne riječi

poplar wood; densification; heat modification; physical properties

Hrčak ID:

191942

URI

https://hrcak.srce.hr/191942

Datum izdavanja:

3.1.2018.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.672 *