hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20160621115355

New Method of Machining Teeth on Unspecialised Machine Tools

Rafal Talar ; Institute of Mechanical Technology, Faculty of Mechanical Engineering and Management, Poznan University of Technology, Maria Sklodowska-Curie Square 5, 60-965 Poznan, Poland
Piotr Jablonski ; Institute of Mechanical Technology, Faculty of Mechanical Engineering and Management, Poznan University of Technology, Maria Sklodowska-Curie Square 5, 60-965 Poznan, Poland
Wojciech Ptaszynski ; Institute of Mechanical Technology, Faculty of Mechanical Engineering and Management, Poznan University of Technology, Maria Sklodowska-Curie Square 5, 60-965 Poznan, Poland

Puni tekst: engleski, pdf (3 MB) str. 80-87 preuzimanja: 636* citiraj
APA 6th Edition
Talar, R., Jablonski, P. i Ptaszynski, W. (2018). New Method of Machining Teeth on Unspecialised Machine Tools. Tehnički vjesnik, 25 (1), 80-87. https://doi.org/10.17559/TV-20160621115355
MLA 8th Edition
Talar, Rafal, et al. "New Method of Machining Teeth on Unspecialised Machine Tools." Tehnički vjesnik, vol. 25, br. 1, 2018, str. 80-87. https://doi.org/10.17559/TV-20160621115355. Citirano 19.06.2021.
Chicago 17th Edition
Talar, Rafal, Piotr Jablonski i Wojciech Ptaszynski. "New Method of Machining Teeth on Unspecialised Machine Tools." Tehnički vjesnik 25, br. 1 (2018): 80-87. https://doi.org/10.17559/TV-20160621115355
Harvard
Talar, R., Jablonski, P., i Ptaszynski, W. (2018). 'New Method of Machining Teeth on Unspecialised Machine Tools', Tehnički vjesnik, 25(1), str. 80-87. https://doi.org/10.17559/TV-20160621115355
Vancouver
Talar R, Jablonski P, Ptaszynski W. New Method of Machining Teeth on Unspecialised Machine Tools. Tehnički vjesnik [Internet]. 2018 [pristupljeno 19.06.2021.];25(1):80-87. https://doi.org/10.17559/TV-20160621115355
IEEE
R. Talar, P. Jablonski i W. Ptaszynski, "New Method of Machining Teeth on Unspecialised Machine Tools", Tehnički vjesnik, vol.25, br. 1, str. 80-87, 2018. [Online]. https://doi.org/10.17559/TV-20160621115355

Sažetak
In the present work, the authors describe elaborated method of machining teeth with the use of unspecialized machine tools. In the first part of the work the need to develop such a method has been shown and the drawbacks of the known methods have been indicated. Further part of the work describes the process of mathematical modelling the purpose of which was to determine the tool paths during machining. Next, the kinetics of teeth machining with the use of a universal CNC milling centre is presented. Further on, the operation of the algorithm, the user’s interface of the elaborated software and the parameters influencing the machining process have been shown. In the final part of the work, the results of examination of the obtained details have been shown on a gear wheel as an example. The origin of machining errors and their significance has been discussed. In conclusions, summary of obtained results is presented. In last paragraphs, authors discuss machining accuracy of developed method, and application possibilities of described method are emphasised as well. Performed verification proved that developed method is capable of machining gears of quality comparable with these machined with specialised equipment.

Ključne riječi
CNC machine tools; LabView; machine tool accuracy; teeth accuracy; teeth machining

Hrčak ID: 193598

URI
https://hrcak.srce.hr/193598

Posjeta: 1.019 *