hrcak mascot   Srce   HID

Polytechnic and design, Vol. 5 No. 3, 2017.

Prethodno priopćenje
https://doi.org/10.19279/TVZ.PD.2017-5-3-19

EVALUATION OF FINISHED PRODUCT QUALITY DEPEDING ON PAPER PROPERTIES AND BINDING TECHNIQUE

Gorana Petković   ORCID icon orcid.org/0000-0002-1561-7228 ; University of Zagreb, Faculty of Graphic Arts, Zagreb, Croatia
Suzana Pasanec Preprotić ; University of Zagreb, Faculty of Graphic Arts, Zagreb, Croatia
Dubravko Banić ; University of Zagreb, Faculty of Graphic Arts, Zagreb, Croatia

Puni tekst: engleski, pdf (6 MB) str. 237-247 preuzimanja: 144* citiraj
APA 6th Edition
Petković, G., Pasanec Preprotić, S. i Banić, D. (2017). EVALUATION OF FINISHED PRODUCT QUALITY DEPEDING ON PAPER PROPERTIES AND BINDING TECHNIQUE. Polytechnic and design, 5 (3), 237-247. https://doi.org/10.19279/TVZ.PD.2017-5-3-19
MLA 8th Edition
Petković, Gorana, et al. "EVALUATION OF FINISHED PRODUCT QUALITY DEPEDING ON PAPER PROPERTIES AND BINDING TECHNIQUE." Polytechnic and design, vol. 5, br. 3, 2017, str. 237-247. https://doi.org/10.19279/TVZ.PD.2017-5-3-19. Citirano 20.02.2019.
Chicago 17th Edition
Petković, Gorana, Suzana Pasanec Preprotić i Dubravko Banić. "EVALUATION OF FINISHED PRODUCT QUALITY DEPEDING ON PAPER PROPERTIES AND BINDING TECHNIQUE." Polytechnic and design 5, br. 3 (2017): 237-247. https://doi.org/10.19279/TVZ.PD.2017-5-3-19
Harvard
Petković, G., Pasanec Preprotić, S., i Banić, D. (2017). 'EVALUATION OF FINISHED PRODUCT QUALITY DEPEDING ON PAPER PROPERTIES AND BINDING TECHNIQUE', Polytechnic and design, 5(3), str. 237-247. doi: https://doi.org/10.19279/TVZ.PD.2017-5-3-19
Vancouver
Petković G, Pasanec Preprotić S, Banić D. EVALUATION OF FINISHED PRODUCT QUALITY DEPEDING ON PAPER PROPERTIES AND BINDING TECHNIQUE. Polytechnic and design [Internet]. 2017 [pristupljeno 20.02.2019.];5(3):237-247. doi: https://doi.org/10.19279/TVZ.PD.2017-5-3-19
IEEE
G. Petković, S. Pasanec Preprotić i D. Banić, "EVALUATION OF FINISHED PRODUCT QUALITY DEPEDING ON PAPER PROPERTIES AND BINDING TECHNIQUE", Polytechnic and design, vol.5, br. 3, str. 237-247, 2017. [Online]. doi: https://doi.org/10.19279/TVZ.PD.2017-5-3-19

Sažetak
Perfect bound book is certainly the most used
type of book product on the market. The quality
of this kind of product can be identified with
the binding strength of the book block. There is
only one standardized method for book block
strength determination and it refers to the static
testing of interrupted tensile force required to
separate precisely defined leaves within a test
sample. In this paper, six groups of book block
were investigated, different with regard to
paper composition, i.e. the share of primary and
recycled fibres and thus the content of ash and
calcium carbonate. Furthermore, two binding
techniques were used, but all other parameters
– volume, format, pressure and drying time,
temperature and humidity, were always same and
strictly controlled. Based on obtained results,
evaluation of finished product quality was
performed, depending on paper properties, as well
as evaluation of the used binding techniques. By
calculating coefficients of variation, a binding
technique that allows a more uniform application
and guarantees reliability and repeatability of the
quality results was chosen, regardless the paper
composition.

Ključne riječi
binding technique; perfect bound book; bookbinding strength; primary fibre; recycled fibre

Hrčak ID: 195165

URI
https://hrcak.srce.hr/195165

Posjeta: 174 *