Izvorni znanstveni članak

https://doi.org/10.21278/TOF.42102

Determination of Real Clearances Between Cycloidal Speed Reducer Elements by the Application of Heuristic Optimization

Nenad Kostić ; University of Kragujevac, Faculty of Engineering, Kragujevac, Serbia
Mirko Blagojević orcid.org/0000-0002-0209-5010 ; University of Kragujevac, Faculty of Engineering, Kragujevac, Serbia
Nenad Petrović ; University of Kragujevac, Faculty of Engineering, Kragujevac, Serbia
Miloš Matejić ; University of Kragujevac, Faculty of Engineering, Kragujevac, Serbia
Nenad Marjanović ; University of Kragujevac, Faculty of Engineering, Kragujevac, Serbia

Sažetak

The actual cycloidal speed reducer elements differ from their theoretical ideal due to existing tolerances; therefore, the cycloid disc behaves like a corrected one. This study is oriented towards determining contacts in corrected cycloid speed reducer profiles from the aspect of geometry. Based on this geometry, an objective function was developed for the optimization with some limitations. Heuristic optimization was used to determine the position of the cycloidal drive elements when a contact was established and, consequently, to determine clearances in other places. Some limitations were set so that the model could reflect a real contact. In this study, a TLBO algorithm was used for the optimization of a cycloidal speed reducer. Clearances were analysed for different correction values of the cycloid disc profile of an actual cycloidal drive and the optimization procedure was presented. The results provide a real picture of the contact in the presence of inevitable machining tolerances.

Ključne riječi

cycloidal speed reducer; profile correction; contact; heuristic optimization; teaching-learning-based optimization (TLBO)

Hrčak ID:

198187

URI

https://hrcak.srce.hr/198187

Datum izdavanja:

9.4.2018.

Posjeta: 3.375 *