Tehnički vjesnik, Vol. 25 No. 2, 2018.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20170419111243
A Design for a Novel Open, Intelligent and Integrated CNC System Based on ISO 10303-238 and PMAC
Yu Zhang
; School of Mechanical Engineering and Automation, Northeastern University, NO. 3-11, Wenhua Road, Heping District, Shenyang, China, 110819 or Shenyang Blower Works Group Corporation, No. 16A, Development Road, Economic & Technical Development Zone, Shenyan
Qifeng Zeng
; School of Mechanical Engineering and Automation, Northeastern University, NO. 3-11, Wenhua Road, Heping District, Shenyang, China, 110819
Guodong Mu
; School of Mechanical Engineering and Automation, Northeastern University, NO. 3-11, Wenhua Road, Heping District, Shenyang, China, 110819
Yafei Yang
; School of Mechanical Engineering and Automation, Northeastern University, NO. 3-11, Wenhua Road, Heping District, Shenyang, China, 110819
Yutao Yan
; School of Mechanical Engineering and Automation, Northeastern University, NO. 3-11, Wenhua Road, Heping District, Shenyang, China, 110819
Wanli Song
; School of Mechanical Engineering and Automation, Northeastern University, NO. 3-11, Wenhua Road, Heping District, Shenyang, China, 110819
Yadong Gong
; School of Mechanical Engineering and Automation, Northeastern University, NO. 3-11, Wenhua Road, Heping District, Shenyang, China, 110819
Sažetak
The combination of the high-level data model called ISO 10303-238 with the open programmable multi-axis controller (PMAC) presents a vision for the open, intelligent and integrated computer numerical control (CNC) systems whose demands have been growing with the rapid development of modern manufacturing. Evolved from design philosophy, this paper proposes a novel open, intelligent and integrated CNC system based on ISO 10303-238 and PMAC. In the system, ISO 10303-238 is chosen as the numerical control (NC) data in order to make the CNC system interoperable. And the open master-slave hardware structure on the basis of industrial process computer (IPC) + PMAC with double central processing units (CPUs) is designed in order to make the CNC system flexible. Also, the open and modular software structure is designed in order to make the CNC system intelligent. In addition, the development of the prototype system is given. At the end, it has been verified by case study that the proposed CNC system is feasible and effective.
Ključne riječi
intelligent CNC system; ISO 10303-238; PMAC
Hrčak ID:
199145
URI
Datum izdavanja:
21.4.2018.
Posjeta: 1.356 *