hrcak mascot   Srce   HID

Original scientific paper

Research on cold rolling of 41Cr4/20NiCrMo7 bimetal composite bearing ring

B. S. Sun ; Faculty of Mechanical Engineering & Mechanics, Ningbo University, China
C. W. Wang ; Faculty of Mechanical Engineering & Mechanics, Ningbo University, China
Z. L. Zhao ; Faculty of Mechanical Engineering & Mechanics, Ningbo University, China

Fulltext: english, pdf (198 KB) pages 283-286 downloads: 119* cite
APA 6th Edition
Sun, B.S., Wang, C.W. & Zhao, Z.L. (2018). Research on cold rolling of 41Cr4/20NiCrMo7 bimetal composite bearing ring. Metalurgija, 57 (4), 283-286. Retrieved from https://hrcak.srce.hr/201742
MLA 8th Edition
Sun, B. S., et al. "Research on cold rolling of 41Cr4/20NiCrMo7 bimetal composite bearing ring." Metalurgija, vol. 57, no. 4, 2018, pp. 283-286. https://hrcak.srce.hr/201742. Accessed 27 Feb. 2020.
Chicago 17th Edition
Sun, B. S., C. W. Wang and Z. L. Zhao. "Research on cold rolling of 41Cr4/20NiCrMo7 bimetal composite bearing ring." Metalurgija 57, no. 4 (2018): 283-286. https://hrcak.srce.hr/201742
Harvard
Sun, B.S., Wang, C.W., and Zhao, Z.L. (2018). 'Research on cold rolling of 41Cr4/20NiCrMo7 bimetal composite bearing ring', Metalurgija, 57(4), pp. 283-286. Available at: https://hrcak.srce.hr/201742 (Accessed 27 February 2020)
Vancouver
Sun BS, Wang CW, Zhao ZL. Research on cold rolling of 41Cr4/20NiCrMo7 bimetal composite bearing ring. Metalurgija [Internet]. 2018 [cited 2020 February 27];57(4):283-286. Available from: https://hrcak.srce.hr/201742
IEEE
B.S. Sun, C.W. Wang and Z.L. Zhao, "Research on cold rolling of 41Cr4/20NiCrMo7 bimetal composite bearing ring", Metalurgija, vol.57, no. 4, pp. 283-286, 2018. [Online]. Available: https://hrcak.srce.hr/201742. [Accessed: 27 February 2020]

Abstracts
In order to improve the service life of bearing rings, a new method of cold rolling bimetal composite bearing rings was proposed in this paper.With Abaqus software,a finite element simulation model of the cold rolling of bimetal composite bearing rings was established. The law of the radial stress distribution, the diameter growth and the deformation of plastic zone during the cold rolling of bimetal composite bearing rings were analyzed. The results of these analyzes are helpful to study the deformation characteristics of the cold rolling of bimetal composite bearing rings. The results show that the bimetal composite bearing ring interface is well bonded and no segregation occurs during the process of cold rolling.

Keywords
cold rolling; alloy steels; bearing ring; bimetal composite; finite element simulation

Hrčak ID: 201742

URI
https://hrcak.srce.hr/201742

Visits: 218 *