Skoči na glavni sadržaj

Izvorni znanstveni članak

Research on cold rolling of 41Cr4/20NiCrMo7 bimetal composite bearing ring

B. S. Sun ; Faculty of Mechanical Engineering & Mechanics, Ningbo University, China
C. W. Wang ; Faculty of Mechanical Engineering & Mechanics, Ningbo University, China
Z. L. Zhao ; Faculty of Mechanical Engineering & Mechanics, Ningbo University, China


Puni tekst: engleski pdf 198 Kb

str. 283-286

preuzimanja: 486

citiraj


Sažetak

In order to improve the service life of bearing rings, a new method of cold rolling bimetal composite bearing rings was proposed in this paper.With Abaqus software,a finite element simulation model of the cold rolling of bimetal composite bearing rings was established. The law of the radial stress distribution, the diameter growth and the deformation of plastic zone during the cold rolling of bimetal composite bearing rings were analyzed. The results of these analyzes are helpful to study the deformation characteristics of the cold rolling of bimetal composite bearing rings. The results show that the bimetal composite bearing ring interface is well bonded and no segregation occurs during the process of cold rolling.

Ključne riječi

cold rolling; alloy steels; bearing ring; bimetal composite; finite element simulation

Hrčak ID:

201742

URI

https://hrcak.srce.hr/201742

Datum izdavanja:

1.10.2018.

Posjeta: 957 *