Izvorni znanstveni članak

Analysis of friction coefficient for a base steel 5 % Cr, applying variable loads of 196 N, 294 N and 392 N, and speeds of 0,18 m/sec, 0,36 m/sec and 0,54 m/sec

R. Servin ; Autonomus University of Coahuila, Mexico
I. Calderon ; Autonomus University of Coahuila, Mexico
A. Perez ; Autonomus University of Coahuila, Mexico
F. Equihua ; Autonomus University of Coahuila, Mexico
L. Falcon ; Autonomus University of Coahuila, Mexico
M. Garcia ; Autonomus University of Coahuila, Mexico
P. Orozco ; Autonomus University of Zacatecas, Mexico

Sažetak

The present study consists in analyzing the friction coefficient as a variable of the normal load and slip speed for 5% Cr steel, by applying the Block-on-Disk method according to ASTM D2714. The friction coefficient increases linearly 23,25 % from 0,214 to 0,266 when the load is increased from 196 N to 392 N; the same phenomenon is observed when the friction coefficient increases 47,82 % from 0,23 to 0,34 when the slip speed increases from 0,18 m/sec to 0,54 m/sec. The friction coefficient increased by 23,25 % for an increase in the load from 196 N to 392 N, which corresponds to 100 %, while an increase of the friction coefficient of 47,82 % occurred by increasing the speed from 0,18 m/sec to 0,54 m/sec which corresponds to 200 %.

Ključne riječi

Cr steel; friction coefficient; block-on-disk; normal load; slip speed

Hrčak ID:

201747

URI

https://hrcak.srce.hr/201747

Datum izdavanja:

1.10.2018.

Posjeta: 1.642 *