Izvorni znanstveni članak

https://doi.org/10.31881/TLR.2018.vol1.iss1.p8-17.a1

Influence of Weave and Densities on Visual Appearance of Woven Fabrics Made From Two Colored Yarns

Krste Dimitrovski ; University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Textiles, Graphic Arts and Design, Ljubljana, Slovenia
Urša Grum ; Student, Ljubljana, Slovenia
Klara Kostanjšek ; University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Textiles, Graphic Arts and Design, Ljubljana, Slovenia

Sažetak

The paper examines the effect of different factors, i.e. weft density, weave type and consequently agglomeration of the interlacing points of the same type, on the colour impression of a woven fabric. The experimental part is based on 60 weaved samples which differ in weave type (we used 10 different weave types in which the technical face and technical back are the same), colour of the warp (we used white and black warp) and weft density (we used yarns with densities 15, 20 and 25 yarns / cm). We measured the colour values of the
woven samples. We arranged the measurements in different ways and tried to visually evaluate the effect of density, effect of weave type, also the effect of the size and shape of agglomerated interlacing points of the same type, on the colour impression of the woven fabric. The results of the colour measurements were sorted into tables and presented in graphs, which were used to find the samples within the observed groups of characteristics that showed the biggest colour differences, to calculate these colour differences and observe and explain the effect of the observed factors on the colour impression.

Ključne riječi

Colour impression of woven fabrics; weave type; agglomeration; colour values

Hrčak ID:

202010

URI

https://hrcak.srce.hr/202010

Datum izdavanja:

19.6.2018.

Posjeta: 755 *