hrcak mascot   Srce   HID

Tehnički vjesnik, Vol. 25 No. 3, 2018.

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20180123115758

Optimization of AA5083 Friction Stir Welding Parameters Using Taguchi Method

Abuajila Raweni ; University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11020 Belgrade 35, Serbia
Vidosav Majstorović ; University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11020 Belgrade 35, Serbia
Aleksandar Sedmak ; University of Belgrade, Faculty of Mechanical Engineering, Kraljice Marije 16, 11020 Belgrade 35, Serbia
Srdjan Tadić ; Innovation Center of the Faculty of Mechanical Engineering, Kraljice Marije 16, 11020 Belgrade 35, Serbia
Snežana Kirin ; Innovation Center of the Faculty of Mechanical Engineering, Kraljice Marije 16, 11020 Belgrade 35, Serbia

Puni tekst: engleski, pdf (998 KB) str. 861-866 preuzimanja: 677* citiraj
APA 6th Edition
Raweni, A., Majstorović, V., Sedmak, A., Tadić, S. i Kirin, S. (2018). Optimization of AA5083 Friction Stir Welding Parameters Using Taguchi Method. Tehnički vjesnik, 25 (3), 861-866. https://doi.org/10.17559/TV-20180123115758
MLA 8th Edition
Raweni, Abuajila, et al. "Optimization of AA5083 Friction Stir Welding Parameters Using Taguchi Method." Tehnički vjesnik, vol. 25, br. 3, 2018, str. 861-866. https://doi.org/10.17559/TV-20180123115758. Citirano 21.06.2021.
Chicago 17th Edition
Raweni, Abuajila, Vidosav Majstorović, Aleksandar Sedmak, Srdjan Tadić i Snežana Kirin. "Optimization of AA5083 Friction Stir Welding Parameters Using Taguchi Method." Tehnički vjesnik 25, br. 3 (2018): 861-866. https://doi.org/10.17559/TV-20180123115758
Harvard
Raweni, A., et al. (2018). 'Optimization of AA5083 Friction Stir Welding Parameters Using Taguchi Method', Tehnički vjesnik, 25(3), str. 861-866. https://doi.org/10.17559/TV-20180123115758
Vancouver
Raweni A, Majstorović V, Sedmak A, Tadić S, Kirin S. Optimization of AA5083 Friction Stir Welding Parameters Using Taguchi Method. Tehnički vjesnik [Internet]. 2018 [pristupljeno 21.06.2021.];25(3):861-866. https://doi.org/10.17559/TV-20180123115758
IEEE
A. Raweni, V. Majstorović, A. Sedmak, S. Tadić i S. Kirin, "Optimization of AA5083 Friction Stir Welding Parameters Using Taguchi Method", Tehnički vjesnik, vol.25, br. 3, str. 861-866, 2018. [Online]. https://doi.org/10.17559/TV-20180123115758

Sažetak
In this study, Taguchi design was applied to find out the optimized set of friction steel welding parameters in terms of total crack energy, crack initiation energy, and crack propagation energy in weldments. Taguchi approach was used to design a set of welding experiments concerning rotational welding speed, traversing speed, and tool tilt angle. Welding variables were analyzed by means of Taguchi orthogonal arrays and signal-to-noise ratio analysis to find the optimum welding parameters. ANOVA analysis was used to determine the influence between each of these parameters.

Ključne riječi
ANOVA analysis; crack initiation energy; crack propagation energy; friction stir welding; Taguchi method

Hrčak ID: 202632

URI
https://hrcak.srce.hr/202632

Posjeta: 948 *