Tehnički vjesnik, Vol. 25 No. 4, 2018.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20180306025203
Pose Adjusting Simulation of Hydraulic Support Based on Mechanical-Electrical-Hydraulic Coordination
Zhaosheng Meng
orcid.org/0000-0002-3842-9107
; Department of Mechatronics and Engineering, Shandong University of Science and Technology, Qingdao, China-266590
Qingliang Zeng
orcid.org/0000-0002-3842-9107
; Department of Mechatronics and Engineering, Shandong University of Science and Technology, Qingdao, China-266590
Lirong Wan
; Department of Mechatronics and Engineering, Shandong University of Science and Technology, Qingdao, China-266590
Peng Liu
; Department of Mechatronics and Engineering, Shandong University of Science and Technology, Qingdao, China-266590
Sažetak
The pose variations of the hydraulic support have significant influence on its performance. And the pose adjusting operations are required to be fast and precise, while they have typical mechanical-electric-hydraulic coordination characteristics which are challenging to simulate. In view of these problems, a method has been proposed in this work for accurately monitoring and controlling the pose of the hydraulic support, and using a suitable multi-software co-simulation model to simulate it. A mathematical model for pose monitoring and control was initially established.A teaching-learning-based optimization algorithm (TLBO) was then introduced to obtain the numerical solution of the nonlinear equations.Finally, a numerical model based on mechanical-electrical-hydraulic co-simulation was established. The model was tested and validated by using different pose signals. The results indicate that the pose controller developed in this paper can control the support pose well (iteration time less than 1 s and cumulative error less than 1.5 mm). Moreover, the multi-software co-simulation approach was effective for describing the complex system. The co-simulation platform proposed in this study can benefit the virtual monitoring technology for hydraulic supports.The research provides theoretical basis and technical guidance for the automation and unmanned control of underground mining.
Ključne riječi
hydraulic support; numerical simulation; pose monitoring and controlling; TLBO
Hrčak ID:
204460
URI
Datum izdavanja:
20.8.2018.
Posjeta: 1.404 *