Tehnički vjesnik, Vol. 25 No. 4, 2018.
Pregledni rad
https://doi.org/10.17559/TV-20160728142508
The Use of Simulation Methods in the Analysis of the Manufacturing Process of Hex Allen Bolts
Irena Nowotyńska
orcid.org/0000-0001-5070-7619
; Rzeszow University of Technology, Faculty of Management, al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland
Stanisław Kut
; Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland
Mirosław Osetek
; KOELNER Łańcucka Fabryka Śrub, ul. Podzwierzyniec 41, 37-100 Łańcut, Polan
Sažetak
Forming tools play a very important role in the production of shaped bolts with the use of plastic forming method. In industrial practice, the technological process of conventional shaping is the cold forming plastic, which causes a considerable wear of shaping tools. Properly designed, constructed and operated tool enables to provide high quality products at a sufficiently high volume of production, low cost, and the required level of security. Consequently, this will allow the company to compete effectively in today's market. The paper shows the numerical analysis of stress prevailing in the die during the implementation of forging of hex internal Allen bolts depending on the size of the applied interference. The research has allowed determining the impact of interference, among others, on the distribution of hoop stress in the die during the manufacturing process of the bolts.
Ključne riječi
Allen bolts; cold forming; load die; numerical simulation
Hrčak ID:
204473
URI
Datum izdavanja:
20.8.2018.
Posjeta: 1.432 *