Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.17794/rgn.2018.4.7

SOME ASPECTS OF THE COMPATIBILITY OF MINERAL MINING TECHNOLOGIES

Roman Dychkovskyi orcid id orcid.org/0000-0002-3143-8940 ; National Mining University, Faculty of Mining, Underground Mining Department, D. Yavornytskoho 21, UA-49000 Dnipro, Ukraine
Oleksandr Vladyko ; National Mining University, Faculty of Mining, Underground Mining Department, D. Yavornytskoho 21, UA-49000 Dnipro, Ukraine
Dmytro Maltsev orcid id orcid.org/0000-0003-4122-5743 ; National Mining University, Faculty of Mining, Underground Mining Department, D. Yavornytskoho 21, UA-49000 Dnipro, Ukraine
Edgar Cáceres Cabana ; National University of San Augustin, Institute of Renewable Energy Research and Energy Ef


Puni tekst: hrvatski pdf 60 Kb

str. 83-83

preuzimanja: 261

citiraj

Puni tekst: engleski pdf 339 Kb

str. 73-82

preuzimanja: 531

citiraj


Sažetak

Sometimes in mining it is necessary to combine different extracting technologies within one enterprise. So, in the paper the analysis of scientific and technical mining operations with combined technologies is carried out, the search for structure and their operation in the mining enterprise is performed. The processes and technological parameters of mineral extraction by two fundamentally different technologies are investigated in detail. Due of the introduction of additional technologies, it is possible to involve sub-standard reserves in the production process, an algorithm for determining the technological parameters is developed. This algorithm consists of criteria that make it possible to find compatibility of the work of one or more development technologies while maintaining an effective level of extraction. To do this, all processes at the enterprise are grouped: by degree of exploration, feasibility and economic efficiency. For each of them, certain coefficients were determined on the example of the operation of two specific combined technologies: the extraction of uranium ores and coal. For each group of criteria, certain coefficients are identified that allow assessing the feasibility of applying technology in their area. Their product is a general coefficient of compatibility, which shows the feasibility of introducing additional technology at the enterprise with the feasibility study. It defines the amount of funds invested in the development of an enterprise to achieve efficient mineral extraction with combined technologies within one enterprise. This point can be used to predict the grade variability of stockpiles from the origin source and the methodology allows characterizing the iron grades within stockpiles without any extra sampling.

Ključne riječi

combined mining technology; evaluation criterion; mineral extraction; economic efficiency

Hrčak ID:

205587

URI

https://hrcak.srce.hr/205587

Datum izdavanja:

7.9.2018.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.707 *