hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20160530222544

Wear Analysis of Discs and Balls on a Micro-Scale

Pawel Pawlus ; Rzeszow University of Technology, Faculty of Mechanical Engineering and Astronautics, Powstancow Warszawy 8 Av., 35-959 Rzeszow, Poland
Andrzej Dzierwa ; Rzeszow University of Technology, Faculty of Mechanical Engineering and Astronautics, Powstancow Warszawy 8 Av., 35-959 Rzeszow, Poland

Puni tekst: engleski, pdf (2 MB) str. 299-305 preuzimanja: 124* citiraj
APA 6th Edition
Pawlus, P. i Dzierwa, A. (2018). Wear Analysis of Discs and Balls on a Micro-Scale. Tehnički vjesnik, 25 (Supplement 2), 299-305. https://doi.org/10.17559/TV-20160530222544
MLA 8th Edition
Pawlus, Pawel i Andrzej Dzierwa. "Wear Analysis of Discs and Balls on a Micro-Scale." Tehnički vjesnik, vol. 25, br. Supplement 2, 2018, str. 299-305. https://doi.org/10.17559/TV-20160530222544. Citirano 19.11.2019.
Chicago 17th Edition
Pawlus, Pawel i Andrzej Dzierwa. "Wear Analysis of Discs and Balls on a Micro-Scale." Tehnički vjesnik 25, br. Supplement 2 (2018): 299-305. https://doi.org/10.17559/TV-20160530222544
Harvard
Pawlus, P., i Dzierwa, A. (2018). 'Wear Analysis of Discs and Balls on a Micro-Scale', Tehnički vjesnik, 25(Supplement 2), str. 299-305. https://doi.org/10.17559/TV-20160530222544
Vancouver
Pawlus P, Dzierwa A. Wear Analysis of Discs and Balls on a Micro-Scale. Tehnički vjesnik [Internet]. 2018 [pristupljeno 19.11.2019.];25(Supplement 2):299-305. https://doi.org/10.17559/TV-20160530222544
IEEE
P. Pawlus i A. Dzierwa, "Wear Analysis of Discs and Balls on a Micro-Scale", Tehnički vjesnik, vol.25, br. Supplement 2, str. 299-305, 2018. [Online]. https://doi.org/10.17559/TV-20160530222544

Sažetak
Surface topographies of discs and balls after wear process were analysed. Discs were made from 42CrMo4 steel with hardness of 42 HRC, but balls from 100Cr6 steel of hardness 64 HRC. They were measured using white light interferometer Talysurf CCI Lite. Procedures for minimizing errors of wear loss determination were discussed. They can be applied thanks to software TalyMap. It was found that application of wear analysis of discs and balls on a micro scale allowed us precise determination of their wear after tribological tests, however this analysis should be careful, particularly for surfaces of high roughness.

Ključne riječi
ball; disc; surface topography; wear

Hrčak ID: 205923

URI
https://hrcak.srce.hr/205923

Posjeta: 222 *