Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.17559/TV-20180511191214

A New Approach to the Design of a CNC Machine for Making Orthotic Moulds

Karlo Obrovac orcid id orcid.org/0000-0002-4463-8212 ; ORTOGEN d.o.o., Remetinec 42, 10000 Zagreb, Croatia
Pero Raos orcid id orcid.org/0000-0001-9263-1325 ; Mechanical Engineering Faculty in Slavonski Brod, Trg I. B. Mazuranic 2, 35000 Slavonski Brod, Croatia
Tomislav Galeta orcid id orcid.org/0000-0002-0770-5447 ; Mechanical Engineering Faculty in Slavonski Brod, Trg I. B. Mazuranic 2, 35000 Slavonski Brod, Croatia
Josip Nižetić orcid id orcid.org/0000-0002-3999-7165 ; COGNITUS d.o.o., Remetinec 42, 10000 Zagreb, Croatia
Alan Mutka ; Bjelovar University of Applied Sciences, Trg Eugena Kvaternika 4, 43000 Bjelovar, Croatia
Jadranka Vuković Obrovac ; ORTOGEN d.o.o., Remetinec 42, 10000 Zagreb, Croatia
Zoran Vrhovski orcid id orcid.org/0000-0002-0343-6657 ; Bjelovar University of Applied Sciences, Trg Eugena Kvaternika 4, 43000 Bjelovar, Croatia


Puni tekst: engleski pdf 1.612 Kb

str. 460-465

preuzimanja: 836

citiraj


Sažetak

This paper is about defining a different novel concept of a simple machine for producing spinal orthosis moulds. Should such a machine be developed, the required functionality with a special emphasis on low price is to be achieved. The paper considers the issues regarding the kinematics and feasibility confirmation as related to the concept. A CAD model made for the purpose of simulation and activities related to the software development for generating tool trajectories along with the belonging kinematics and trajectory visualization were carried out.

Ključne riječi

CAD/CAM; O&P; spinal orthosis; 3D scanning

Hrčak ID:

205944

URI

https://hrcak.srce.hr/205944

Datum izdavanja:

22.9.2018.

Posjeta: 1.546 *