hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.5552/drind.2018.1752

Effect of Thermal Treatment on Combustion Process of Spruce Wood (Picea abies)

Peter Rantuch   ORCID icon orcid.org/0000-0001-5826-8323 ; Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava, Slovak Republic
Jozef Martinka   ORCID icon orcid.org/0000-0002-0060-5785 ; Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava, Slovak Republic
Igor Wachter   ORCID icon orcid.org/0000-0003-0691-0462 ; Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava, Slovak Republic

Puni tekst: engleski, pdf (662 KB) str. 231-237 preuzimanja: 162* citiraj
APA 6th Edition
Rantuch, P., Martinka, J. i Wachter, I. (2018). Effect of Thermal Treatment on Combustion Process of Spruce Wood (Picea abies). Drvna industrija, 69 (3), 231-237. https://doi.org/10.5552/drind.2018.1752
MLA 8th Edition
Rantuch, Peter, et al. "Effect of Thermal Treatment on Combustion Process of Spruce Wood (Picea abies)." Drvna industrija, vol. 69, br. 3, 2018, str. 231-237. https://doi.org/10.5552/drind.2018.1752. Citirano 18.11.2019.
Chicago 17th Edition
Rantuch, Peter, Jozef Martinka i Igor Wachter. "Effect of Thermal Treatment on Combustion Process of Spruce Wood (Picea abies)." Drvna industrija 69, br. 3 (2018): 231-237. https://doi.org/10.5552/drind.2018.1752
Harvard
Rantuch, P., Martinka, J., i Wachter, I. (2018). 'Effect of Thermal Treatment on Combustion Process of Spruce Wood (Picea abies)', Drvna industrija, 69(3), str. 231-237. https://doi.org/10.5552/drind.2018.1752
Vancouver
Rantuch P, Martinka J, Wachter I. Effect of Thermal Treatment on Combustion Process of Spruce Wood (Picea abies). Drvna industrija [Internet]. 2018 [pristupljeno 18.11.2019.];69(3):231-237. https://doi.org/10.5552/drind.2018.1752
IEEE
P. Rantuch, J. Martinka i I. Wachter, "Effect of Thermal Treatment on Combustion Process of Spruce Wood (Picea abies)", Drvna industrija, vol.69, br. 3, str. 231-237, 2018. [Online]. https://doi.org/10.5552/drind.2018.1752

Sažetak
This paper deals with the effect of thermal treatment of spruce wood on its burning process. Samples of 100 mm x 100 mm were dried out and then heat-treated at 150 °C, 200 °C, 250 °C and 300 °C. Thus prepared samples were tested on a cone calorimeter at a heat flow of 50 kW·m-2. The obtained results clearly show that with the increasing temperature of the treatment, the released heat from the surface unit decreases and the unit weight increases. The carbon dioxide concentration in the flue gas increases as well, however, the optical density of the smoke decreases substantially. It can be stated that the burning of spruce wood is considerably affected mainly by the thermal treatment at temperatures above 200 °C. From the point of view of the use of spruce wood as fuel, the most optimal treatment temperature is 250 °C.

Ključne riječi
torrefaction; Picea abies wood; heat flux; heat release

Hrčak ID: 206352

URI
https://hrcak.srce.hr/206352

[hrvatski]

Posjeta: 272 *