hrcak mascot   Srce   HID

Original scientific paper
https://doi.org/10.15255/KUI.2018.010

Thermal and Mechanical Properties of Thermoplastic Starch Blends

Vesna Ocelić Bulatović ; Faculty of Chemical Engineering and Technology University of Zagreb, Marulićev trg 19 10 000 Zagreb, Croatia
Ivana Borković ; Faculty of Chemical Engineering and Technology University of Zagreb, Marulićev trg 19 10 000 Zagreb, Croatia
Dajana Kučić Grgić   ORCID icon orcid.org/0000-0001-8427-6482 ; Faculty of Chemical Engineering and Technology University of Zagreb, Marulićev trg 19 10 000 Zagreb, Croatia
Antun Jozinović   ORCID icon orcid.org/0000-0001-9627-1013 ; Faculty of Food Technology, University of Osijek, Franje Kuhača 20, 31 000 Osijek, Croatia

Fulltext: croatian, pdf (1 MB) pages P21-P31 downloads: 230* cite
APA 6th Edition
Ocelić Bulatović, V., Borković, I., Kučić Grgić, D. & Jozinović, A. (2018). Toplinska i mehanička svojstva mješavina na bazi termoplastičnog škroba. Kemija u industriji, 67 (13 (special issue)), P21-P31. https://doi.org/10.15255/KUI.2018.010
MLA 8th Edition
Ocelić Bulatović, Vesna, et al. "Toplinska i mehanička svojstva mješavina na bazi termoplastičnog škroba." Kemija u industriji, vol. 67, no. 13 (special issue), 2018, pp. P21-P31. https://doi.org/10.15255/KUI.2018.010. Accessed 20 Sep. 2021.
Chicago 17th Edition
Ocelić Bulatović, Vesna, Ivana Borković, Dajana Kučić Grgić and Antun Jozinović. "Toplinska i mehanička svojstva mješavina na bazi termoplastičnog škroba." Kemija u industriji 67, no. 13 (special issue) (2018): P21-P31. https://doi.org/10.15255/KUI.2018.010
Harvard
Ocelić Bulatović, V., et al. (2018). 'Toplinska i mehanička svojstva mješavina na bazi termoplastičnog škroba', Kemija u industriji, 67(13 (special issue)), pp. P21-P31. https://doi.org/10.15255/KUI.2018.010
Vancouver
Ocelić Bulatović V, Borković I, Kučić Grgić D, Jozinović A. Toplinska i mehanička svojstva mješavina na bazi termoplastičnog škroba. Kemija u industriji [Internet]. 2018 [cited 2021 September 20];67(13 (special issue)):P21-P31. https://doi.org/10.15255/KUI.2018.010
IEEE
V. Ocelić Bulatović, I. Borković, D. Kučić Grgić and A. Jozinović, "Toplinska i mehanička svojstva mješavina na bazi termoplastičnog škroba", Kemija u industriji, vol.67, no. 13 (special issue), pp. P21-P31, 2018. [Online]. https://doi.org/10.15255/KUI.2018.010

Abstracts
Blends of low-density polyethylene (PE-LD) and thermoplastic starch (TPS) were prepared in order to obtain a biodegradable polymeric material as a packaging material. The characterization of thermal and mechanical properties, as well as water vapour permeability was performed due to the highly hydrophilic character of the starch. The addition of TPS to PE-LD/TPS blends influenced the degree of crystalline to 20 wt. % due to nucleation effect of TPS. The tensile strength and elongation at break decreased by increasing the starch level in the PE-LD/TPS blends, but the elastic modulus increased. The initial decomposition temperature shifted to a lower temperature, indicating a reduction in the thermal stability of PE-LD by addition of TPS. Glycerol as a starch plasticizer contributed to increasing the thermal stability of starch, but had a negative effect on water vapour permeability.

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Keywords
biodegradable materials; low-density polyethylene; thermoplastic starch; thermal properties; mechanical properties; water vapour permeability

Hrčak ID: 207026

URI
https://hrcak.srce.hr/207026

[croatian]

Visits: 517 *