hrcak mascot   Srce   HID

Tehnički vjesnik, Vol.25 No.5 Listopad 2018.

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20170511125234

Investigation of the Effect of Workpiece Resolution on Milling Simulation Accuracy in Production Module 3D CAE Software

Piotr Löschner ; Opole University of Technology, Faculty of Mechanical Engineering, Mikołajczyka 5 st., 45-271 Opole, Poland
Krzysztof Jarosz ; Opole University of Technology, Faculty of Mechanical Engineering, Mikołajczyka 5 st., 45-271 Opole, Poland
Piotr Niesłony ; Opole University of Technology, Faculty of Mechanical Engineering, Mikołajczyka 5 st., 45-271 Opole, Poland

Puni tekst: engleski, pdf (1 MB) str. 1384-1388 preuzimanja: 28* citiraj
APA 6th Edition
Löschner, P., Jarosz, K. i Niesłony, P. (2018). Investigation of the Effect of Workpiece Resolution on Milling Simulation Accuracy in Production Module 3D CAE Software. Tehnički vjesnik, 25 (5), 1384-1388. https://doi.org/10.17559/TV-20170511125234
MLA 8th Edition
Löschner, Piotr, et al. "Investigation of the Effect of Workpiece Resolution on Milling Simulation Accuracy in Production Module 3D CAE Software." Tehnički vjesnik, vol. 25, br. 5, 2018, str. 1384-1388. https://doi.org/10.17559/TV-20170511125234. Citirano 17.12.2018.
Chicago 17th Edition
Löschner, Piotr, Krzysztof Jarosz i Piotr Niesłony. "Investigation of the Effect of Workpiece Resolution on Milling Simulation Accuracy in Production Module 3D CAE Software." Tehnički vjesnik 25, br. 5 (2018): 1384-1388. https://doi.org/10.17559/TV-20170511125234
Harvard
Löschner, P., Jarosz, K., i Niesłony, P. (2018). 'Investigation of the Effect of Workpiece Resolution on Milling Simulation Accuracy in Production Module 3D CAE Software', Tehnički vjesnik, 25(5), str. 1384-1388. doi: https://doi.org/10.17559/TV-20170511125234
Vancouver
Löschner P, Jarosz K, Niesłony P. Investigation of the Effect of Workpiece Resolution on Milling Simulation Accuracy in Production Module 3D CAE Software. Tehnički vjesnik [Internet]. 2018 [pristupljeno 17.12.2018.];25(5):1384-1388. doi: https://doi.org/10.17559/TV-20170511125234
IEEE
P. Löschner, K. Jarosz i P. Niesłony, "Investigation of the Effect of Workpiece Resolution on Milling Simulation Accuracy in Production Module 3D CAE Software", Tehnički vjesnik, vol.25, br. 5, str. 1384-1388, 2018. [Online]. doi: https://doi.org/10.17559/TV-20170511125234

Sažetak
The aim of this work was to present the effect of workpiece resolution on simulation accuracy in Production Module 3D CAE software. The concept of resolution and working principle of CAD model conversion into proprietary *.TWSM format was explained. Next, the effects of model resolution on simulation results were presented, using an example of a face milling operation. Four different workpiece model resolutions were used, including the resolution value recommended by the software developer. Comparison of simulation results for different workpiece resolutions was conducted, obtained results were analysed, with particular focus on the effect of workpiece resolution on simulated cutting force values. The authors have found a substantial link between workpiece resolution, material removal rate and simulation accuracy.

Ključne riječi
CAD model; cutting force; Production Module 3D; simulation accuracy; workpiece model resolution

Hrčak ID: 207437

URI
https://hrcak.srce.hr/207437

Posjeta: 57 *