hrcak mascot   Srce   HID

Tehnički vjesnik, Vol.25 No.5 Listopad 2018.

Prethodno priopćenje
https://doi.org/10.17559/TV-20150208190548

The Effect of Process Parameters on Surface Finish of Metal Spun Parts

Peter Šugár   ORCID icon orcid.org/0000-0002-9499-5672 ; Slovak University of Technology, Faculty of Material Science and Technology, Institute of Production Engineering, J. Bottu 25, 917 24 Trnava, Slovakia
Jana Šugárová ; Slovak University of Technology, Faculty of Material Science and Technology, Institute of Production Engineering, J. Bottu 25, 917 24 Trnava, Slovakia
Ján Petrovič ; Eiben Co Ltd., Továrenská 1, 976 31 Vlkanová, Slovakia

Puni tekst: engleski, pdf (1 MB) str. 1467-1471 preuzimanja: 23* citiraj
APA 6th Edition
Šugár, P., Šugárová, J. i Petrovič, J. (2018). The Effect of Process Parameters on Surface Finish of Metal Spun Parts. Tehnički vjesnik, 25 (5), 1467-1471. https://doi.org/10.17559/TV-20150208190548
MLA 8th Edition
Šugár, Peter, et al. "The Effect of Process Parameters on Surface Finish of Metal Spun Parts." Tehnički vjesnik, vol. 25, br. 5, 2018, str. 1467-1471. https://doi.org/10.17559/TV-20150208190548. Citirano 17.12.2018.
Chicago 17th Edition
Šugár, Peter, Jana Šugárová i Ján Petrovič. "The Effect of Process Parameters on Surface Finish of Metal Spun Parts." Tehnički vjesnik 25, br. 5 (2018): 1467-1471. https://doi.org/10.17559/TV-20150208190548
Harvard
Šugár, P., Šugárová, J., i Petrovič, J. (2018). 'The Effect of Process Parameters on Surface Finish of Metal Spun Parts', Tehnički vjesnik, 25(5), str. 1467-1471. doi: https://doi.org/10.17559/TV-20150208190548
Vancouver
Šugár P, Šugárová J, Petrovič J. The Effect of Process Parameters on Surface Finish of Metal Spun Parts. Tehnički vjesnik [Internet]. 2018 [pristupljeno 17.12.2018.];25(5):1467-1471. doi: https://doi.org/10.17559/TV-20150208190548
IEEE
P. Šugár, J. Šugárová i J. Petrovič, "The Effect of Process Parameters on Surface Finish of Metal Spun Parts", Tehnički vjesnik, vol.25, br. 5, str. 1467-1471, 2018. [Online]. doi: https://doi.org/10.17559/TV-20150208190548

Sažetak
The paper brings the results of surface finish analysis of formed parts produced by CNC multi-pass conventional metal spinning. The influence of mandrel speed, spinning roller feed and workpiece geometry on the surface finish of formed parts made of mild steel type of EN 10025-94 (ISO 630-80) have been studied by profile and 3D surface parameters evaluating. For the study, the full factorial design of experiment (33) was used and ANOVA (Analysis of Variance) was carried out. It is shown that the optimal roller feed exists within the range of minimal and maximal experimental feed values and the surface roughness measured in different areas of experimental samples (radius R10, conical area, cylindrical area) indicates that the higher surface roughness occurs at the conical surfaces.

Ključne riječi
ANOVA; metal spinning; roughness; surface

Hrčak ID: 207449

URI
https://hrcak.srce.hr/207449

Posjeta: 49 *