Izvorni znanstveni članak

Smart grid substation equipment maintenance management functionality based on control center SCADA data

Igor Ivanković orcid.org/0000-0002-7305-6123 ; HOPS Croatia
Domagoj Peharda ; Končar-KET Croatia
Damir Novosel ; Quanta Technology USA
Ksenija Žubrinić-Kostović ; HOPS Croatia
Ana Kekelj ; HOPS Croatia

Sažetak

Classic approach to preventive maintenance of equipment in power system substations was based on periodical maintenance according to regulations
and best practices recommended by vendors. SCADA system in HOPS is used primary for real-time monitoring and control of the equipment in
substations. Real time data available in SCADA databases contain useful information for substation maintenance optimization based on operational
conditions. Malfunctions and failures in the substations are monitored via SCADA system. Analyses of these data can be used to evaluate maintenance
strategy and plan the reconstructions and replacement of the equipment.
This article presents current maintenance management approach in HOPS, which is the only transmission system operator in Croatia, and possible
improvements in efficiency of equipment maintenance using SCADA data. Prerequisite for the analyses of these kinds of data is standardization and
unification of information names and structures. HOPS put a lot of effort in standardization of SCADA data during last refurbishment of control centers.
Use of SCADA data for analysis drives the need for standardization and vice versa.
Examples of statistical analyses of the SCADA data are done on multiple levels. High level analyses is used to provide the global overview of the
real time data. It can point to suspicious information that require detailed analyses. The signals that appear often in the list can indicate that there is
a problem in the primary equipment, monitoring system or alarm configuration. Low level analyses can be done on target information important for
equipment maintenance. In this paper some low level analyses are presented for switching equipment, transformer lifetime, equipment in operation,
and tap changer operation. An analysis is made for number of switching operations for breakers and disconnectors in different operational conditions.
Preventive maintenance should be done based on number of switching in normal operations and even more often for breakers that are often interrupting
fault current. SCADA data can be used for availability of the equipment and duration of failures thus providing valuable information to managers.
An analysis on RTU communication availability is shown.

Ključne riječi

SCADA data – Equipment maintenance – Maintenance management – Smart grid – SCADA data standardization – Analyzing alarms and events – Analyzing measurement – Key performance indices.

Hrčak ID:

213513

URI

https://hrcak.srce.hr/213513

Datum izdavanja:

20.7.2018.

Posjeta: 1.062 *