hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.30765/er.39.1.10

Application of model-based design tool X2C in induction machine vector control

Nikola Lopac   ORCID icon orcid.org/0000-0002-0616-1265 ; Faculty of Engineering, University of Rijeka
Gordan Šegon
Neven Bulić   ORCID icon orcid.org/0000-0001-8957-020X ; Faculty of Engineering, University of Rijeka

Puni tekst: engleski, pdf (954 KB) str. 90-104 preuzimanja: 191* citiraj
APA 6th Edition
Lopac, N., Šegon, G. i Bulić, N. (2019). Application of model-based design tool X2C in induction machine vector control. Engineering Review, 39 (1), 90-104. https://doi.org/10.30765/er.39.1.10
MLA 8th Edition
Lopac, Nikola, et al. "Application of model-based design tool X2C in induction machine vector control." Engineering Review, vol. 39, br. 1, 2019, str. 90-104. https://doi.org/10.30765/er.39.1.10. Citirano 05.04.2020.
Chicago 17th Edition
Lopac, Nikola, Gordan Šegon i Neven Bulić. "Application of model-based design tool X2C in induction machine vector control." Engineering Review 39, br. 1 (2019): 90-104. https://doi.org/10.30765/er.39.1.10
Harvard
Lopac, N., Šegon, G., i Bulić, N. (2019). 'Application of model-based design tool X2C in induction machine vector control', Engineering Review, 39(1), str. 90-104. https://doi.org/10.30765/er.39.1.10
Vancouver
Lopac N, Šegon G, Bulić N. Application of model-based design tool X2C in induction machine vector control. Engineering Review [Internet]. 2019 [pristupljeno 05.04.2020.];39(1):90-104. https://doi.org/10.30765/er.39.1.10
IEEE
N. Lopac, G. Šegon i N. Bulić, "Application of model-based design tool X2C in induction machine vector control", Engineering Review, vol.39, br. 1, str. 90-104, 2019. [Online]. https://doi.org/10.30765/er.39.1.10

Sažetak
Open source software tools for model-based design of embedded control systems represent a new method for rapid development and testing of advanced control structures in modern electric drives. The new concept of one of those tools, X2C, is presented in this paper, and in order to evaluate its performance in the development of complex control systems, it is applied to implement induction machine vector control. Based on the simulation model of the drive developed in PLECS, the parameters of the controllers were determined. The algorithm for the vector control of the induction machine was developed in X2C, implemented on the digital signal processor and applied to the real system. The system was tested during the no-load acceleration, deceleration, and reversing of the motor, while measuring the electrical and mechanical variables. Finally, the quantitative comparison of the experimental results and the results obtained by the equivalent simulations, based on the Integral Squared Error criterion, revealed that these results were well matched. This finding suggested that the control system was successfully implemented, thereby confirming the effectiveness of X2C tool in this particular type of application. With this work it has been shown that a transition from simulation to actual environment is rapidly achieved, with a simple verification of implemented methods accompanying the process. Realization of this work is a step forward in the utilization of open source software packages for implementation of induction machine vector control with the purpose of rapid verification of simulation models.

Ključne riječi
model-based design; embedded control systems; X2C tool; digital signal processor; induction machine; vector control

Hrčak ID: 215369

URI
https://hrcak.srce.hr/215369

Posjeta: 304 *