hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20170302170511

Particular Solution of Cutting Tool Path Applied on Helical Surface with Circular Profile

Tadeusz Nieszporek ; Czestochowa University of Technology, Institute of Mechanical Technologies, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland
Piotr Boral ; Czestochowa University of Technology, Institute of Mechanical Technologies, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland
Rafał Gołębski ; Czestochowa University of Technology, Institute of Mechanical Technologies, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland

Puni tekst: engleski, pdf (1 MB) str. 22-28 preuzimanja: 115* citiraj
APA 6th Edition
Nieszporek, T., Boral, P. i Gołębski, R. (2019). Particular Solution of Cutting Tool Path Applied on Helical Surface with Circular Profile. Tehnički vjesnik, 26 (1), 22-28. https://doi.org/10.17559/TV-20170302170511
MLA 8th Edition
Nieszporek, Tadeusz, et al. "Particular Solution of Cutting Tool Path Applied on Helical Surface with Circular Profile." Tehnički vjesnik, vol. 26, br. 1, 2019, str. 22-28. https://doi.org/10.17559/TV-20170302170511. Citirano 18.07.2019.
Chicago 17th Edition
Nieszporek, Tadeusz, Piotr Boral i Rafał Gołębski. "Particular Solution of Cutting Tool Path Applied on Helical Surface with Circular Profile." Tehnički vjesnik 26, br. 1 (2019): 22-28. https://doi.org/10.17559/TV-20170302170511
Harvard
Nieszporek, T., Boral, P., i Gołębski, R. (2019). 'Particular Solution of Cutting Tool Path Applied on Helical Surface with Circular Profile', Tehnički vjesnik, 26(1), str. 22-28. doi: https://doi.org/10.17559/TV-20170302170511
Vancouver
Nieszporek T, Boral P, Gołębski R. Particular Solution of Cutting Tool Path Applied on Helical Surface with Circular Profile. Tehnički vjesnik [Internet]. 2019 [pristupljeno 18.07.2019.];26(1):22-28. doi: https://doi.org/10.17559/TV-20170302170511
IEEE
T. Nieszporek, P. Boral i R. Gołębski, "Particular Solution of Cutting Tool Path Applied on Helical Surface with Circular Profile", Tehnički vjesnik, vol.26, br. 1, str. 22-28, 2019. [Online]. doi: https://doi.org/10.17559/TV-20170302170511

Sažetak
The helical surface with circular profile is a special case of the torus-derivative surface, which is shaped using a rotary tool with the circular axial profile of the tool action surface. The helical surface is machined with a tool positioning, in the characteristic section, has a circular profile, owing to which the accuracy of its execution can be easily checked. This has been proved using consistently the power-law series method. A helical surface equation has been introduced in the form of an explicit function without the envelope condition.

Ključne riječi
characteristics; circular profile; helical surface; rotary tool

Hrčak ID: 217082

URI
https://hrcak.srce.hr/217082

Posjeta: 213 *