hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.21278/TOF.42401

Surface Integrity after Turning a Duplex Stainless Steel with Respect to Tool Geometry

Jiří Čapek   ORCID icon orcid.org/0000-0002-0695-0619 ; Department of Solid State Engineering, Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Prague, Czech Republic
Kamil Kolařík ; Department of Solid State Engineering, Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Prague, Czech Republic
Miroslav Neslušan ; Faculty of Mechanical Engineering, University of Žilina, Žilina, Slovak Republic
Zdeněk Pitrmuc ; Department of Machining, Process Planning and Metrology, Faculty of Mechanical Engineering, Czech Technical University in Prague, Prague, Czech Republic
Libor Beránek ; Department of Instrumentation and Control Engineering, Faculty of Mechanical Engineering, Center of Advanced Aerospace Technology, Czech Technical University in Prague, Prague, Czech Republic
Karel Trojan ; Department of Solid State Engineering, Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Prague, Czech Republic
Jakub Němeček ; Department of Solid State Engineering, Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Prague, Czech Republic
Nikolaj Ganev ; Department of Solid State Engineering, Faculty of Nuclear Sciences and Physical Engineering, Czech Technical University in Prague, Prague, Czech Republic
Jiří Kyncl ; Department of Machining, Process Planning and Metrology, Faculty of Mechanical Engineering, Czech Technical University in Prague, Prague, Czech Republic
Petr Mikeš ; Department of Instrumentation and Control Engineering, Faculty of Mechanical Engineering, Center of Advanced Aerospace Technology, Czech Technical University in Prague, Prague, Czech Republic

Puni tekst: engleski, pdf (1 MB) str. 1-14 preuzimanja: 124* citiraj
APA 6th Edition
Čapek, J., Kolařík, K., Neslušan, M., Pitrmuc, Z., Beránek, L., Trojan, K., ... Mikeš, P. (2018). Surface Integrity after Turning a Duplex Stainless Steel with Respect to Tool Geometry. Transactions of FAMENA, 42 (4), 1-14. https://doi.org/10.21278/TOF.42401
MLA 8th Edition
Čapek, Jiří, et al. "Surface Integrity after Turning a Duplex Stainless Steel with Respect to Tool Geometry." Transactions of FAMENA, vol. 42, br. 4, 2018, str. 1-14. https://doi.org/10.21278/TOF.42401. Citirano 16.10.2019.
Chicago 17th Edition
Čapek, Jiří, Kamil Kolařík, Miroslav Neslušan, Zdeněk Pitrmuc, Libor Beránek, Karel Trojan, Jakub Němeček, Nikolaj Ganev, Jiří Kyncl i Petr Mikeš. "Surface Integrity after Turning a Duplex Stainless Steel with Respect to Tool Geometry." Transactions of FAMENA 42, br. 4 (2018): 1-14. https://doi.org/10.21278/TOF.42401
Harvard
Čapek, J., et al. (2018). 'Surface Integrity after Turning a Duplex Stainless Steel with Respect to Tool Geometry', Transactions of FAMENA, 42(4), str. 1-14. https://doi.org/10.21278/TOF.42401
Vancouver
Čapek J, Kolařík K, Neslušan M, Pitrmuc Z, Beránek L, Trojan K i sur. Surface Integrity after Turning a Duplex Stainless Steel with Respect to Tool Geometry. Transactions of FAMENA [Internet]. 2018 [pristupljeno 16.10.2019.];42(4):1-14. https://doi.org/10.21278/TOF.42401
IEEE
J. Čapek, et al., "Surface Integrity after Turning a Duplex Stainless Steel with Respect to Tool Geometry", Transactions of FAMENA, vol.42, br. 4, str. 1-14, 2018. [Online]. https://doi.org/10.21278/TOF.42401

Sažetak
This study deals with surface integrity expressed in terms of stress state as well as microstructure alterations after turning a duplex stainless steel. Residual stresses and the presence of strain-induced martensite are studied as functions of the rake angle. Residual stresses of surface and sub-surface layers were determined by the use of the X-ray diffraction and hole-drilling techniques. X-ray diffraction enables us to distinguish between residual stresses in each phase separately, which is not possible when the hole-drilling method is applied. Furthermore, alterations in the near surface region are also analysed by the use of the magnetic Barkhausen noise and metallographic observation.

Ključne riječi
duplex stainless steels; X-ray diffraction; residual stresses; strain-induced martensite; Barkhausen noise

Hrčak ID: 217493

URI
https://hrcak.srce.hr/217493

Posjeta: 256 *