hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.31534/engmod.2018.3.ri.02f

Surface roughness modelling in super duplex stainless steel turning

Mario Veić ; University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 21000 Split, CROATIA
Sonja Jozić ; University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 21000 Split, CROATIA
Dražen Bajić ; University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 21000 Split, CROATIA

Puni tekst: engleski, pdf (852 KB) str. 19-34 preuzimanja: 207* citiraj
APA 6th Edition
Veić, M., Jozić, S. i Bajić, D. (2018). Surface roughness modelling in super duplex stainless steel turning. International Journal for Engineering Modelling, 31 (3), 19-34. https://doi.org/10.31534/engmod.2018.3.ri.02f
MLA 8th Edition
Veić, Mario, et al. "Surface roughness modelling in super duplex stainless steel turning." International Journal for Engineering Modelling, vol. 31, br. 3, 2018, str. 19-34. https://doi.org/10.31534/engmod.2018.3.ri.02f. Citirano 17.11.2019.
Chicago 17th Edition
Veić, Mario, Sonja Jozić i Dražen Bajić. "Surface roughness modelling in super duplex stainless steel turning." International Journal for Engineering Modelling 31, br. 3 (2018): 19-34. https://doi.org/10.31534/engmod.2018.3.ri.02f
Harvard
Veić, M., Jozić, S., i Bajić, D. (2018). 'Surface roughness modelling in super duplex stainless steel turning', International Journal for Engineering Modelling, 31(3), str. 19-34. https://doi.org/10.31534/engmod.2018.3.ri.02f
Vancouver
Veić M, Jozić S, Bajić D. Surface roughness modelling in super duplex stainless steel turning. International Journal for Engineering Modelling [Internet]. 2018 [pristupljeno 17.11.2019.];31(3):19-34. https://doi.org/10.31534/engmod.2018.3.ri.02f
IEEE
M. Veić, S. Jozić i D. Bajić, "Surface roughness modelling in super duplex stainless steel turning", International Journal for Engineering Modelling, vol.31, br. 3, str. 19-34, 2018. [Online]. https://doi.org/10.31534/engmod.2018.3.ri.02f

Sažetak
Super duplex stainless steels are alloys that have good corrosion resistance properties and are intended for applications in corrosive environments. Due to their chemical composition and microstructure providing high strength and thermal resistance as well as high ductility, the machinability of these alloys is difficult, resulting in longer production cycles and higher costs in terms of more frequent replacement of tools. In this paper, the machinability of the super duplex EN 1.4410 was investigated under environmentally friendly machining process by using cold compressed air as a coolant. Experimental data were generated using the range of selected input parameters and correspondingly analysed surface roughness as output data. Predictive models were developed in order to make a comparison of their prediction performance. In addition, this paper also describes the methodology for optimised development of a particular predictive model. Finally, comparative analysis of the accuracy of predictive models was performed in order to define which model represents the best fit for the analysed experimental data, and also to show validity of the optimisation process.

Ključne riječi
ANFIS; response surface method; super duplex stainless steel; surface roughness; vortex tube.

Hrčak ID: 218238

URI
https://hrcak.srce.hr/218238

Posjeta: 391 *