hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20171006104842

Design of Custom Made Prosthesis of the Hip

Slobodan Tabaković   ORCID icon orcid.org/0000-0001-6470-2376 ; University of Novi Sad, Faculty of Technical Sciences, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia
Milan Zeljković   ORCID icon orcid.org/0000-0002-8542-0535 ; University of Novi Sad, Faculty of Technical Sciences, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia
Zoran Milojević ; University of Novi Sad, Faculty of Technical Sciences, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia
Aleksandar Živković ; University of Novi Sad, Faculty of Technical Sciences, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia

Puni tekst: engleski, pdf (2 MB) str. 323-330 preuzimanja: 474* citiraj
APA 6th Edition
Tabaković, S., Zeljković, M., Milojević, Z. i Živković, A. (2019). Design of Custom Made Prosthesis of the Hip. Tehnički vjesnik, 26 (2), 323-330. https://doi.org/10.17559/TV-20171006104842
MLA 8th Edition
Tabaković, Slobodan, et al. "Design of Custom Made Prosthesis of the Hip." Tehnički vjesnik, vol. 26, br. 2, 2019, str. 323-330. https://doi.org/10.17559/TV-20171006104842. Citirano 19.06.2021.
Chicago 17th Edition
Tabaković, Slobodan, Milan Zeljković, Zoran Milojević i Aleksandar Živković. "Design of Custom Made Prosthesis of the Hip." Tehnički vjesnik 26, br. 2 (2019): 323-330. https://doi.org/10.17559/TV-20171006104842
Harvard
Tabaković, S., et al. (2019). 'Design of Custom Made Prosthesis of the Hip', Tehnički vjesnik, 26(2), str. 323-330. https://doi.org/10.17559/TV-20171006104842
Vancouver
Tabaković S, Zeljković M, Milojević Z, Živković A. Design of Custom Made Prosthesis of the Hip. Tehnički vjesnik [Internet]. 2019 [pristupljeno 19.06.2021.];26(2):323-330. https://doi.org/10.17559/TV-20171006104842
IEEE
S. Tabaković, M. Zeljković, Z. Milojević i A. Živković, "Design of Custom Made Prosthesis of the Hip", Tehnički vjesnik, vol.26, br. 2, str. 323-330, 2019. [Online]. https://doi.org/10.17559/TV-20171006104842

Sažetak
Replacement of a natural hip joint with an artificial is one of the most commonly used surgical procedures in orthopaedic surgery. This paper describes the methodology of the hip joint prosthesis design, which presents the foundation for the automation of all stages of the development of custom-made prostheses. A general mathematical model based mostly on B-spline surfaces is used in order to define the prosthesis geometry. In order to verify the method, a software solution was developed and used for designing prostheses based on ten diagnostic images obtained by various methods. The results of the analysis of the ten designed prostheses, out of which five manufactured, show that deviations from the desired values are less than the errors caused by diagnostic imaging.

Ključne riječi
Computer Aided Design; custom-made endoprosthesis; hip joint

Hrčak ID: 219507

URI
https://hrcak.srce.hr/219507

Posjeta: 770 *