; Department of Manufacturing Technologies, Faculty of Manufacturing Technologies, Technical University of Košice, Bayerova 1, 080 01 Prešov, Slovak Republic
; Department of Monitoring and Designing of Technical Systems, Faculty of Manufacturing Technologies, Bayerova 1,080 01 Prešov, Slovak Republic
APA 6th Edition Vasilko, K. i Murčinková, Z. (2019). Machining of Wood as a Natural Composite Material. Tehnički vjesnik, 26 (2), 363-367. https://doi.org/10.17559/TV-20171110183526
MLA 8th Edition Vasilko, Karol i Zuzana Murčinková. "Machining of Wood as a Natural Composite Material." Tehnički vjesnik, vol. 26, br. 2, 2019, str. 363-367. https://doi.org/10.17559/TV-20171110183526. Citirano 18.05.2021.
Chicago 17th Edition Vasilko, Karol i Zuzana Murčinková. "Machining of Wood as a Natural Composite Material." Tehnički vjesnik 26, br. 2 (2019): 363-367. https://doi.org/10.17559/TV-20171110183526
Harvard Vasilko, K., i Murčinková, Z. (2019). 'Machining of Wood as a Natural Composite Material', Tehnički vjesnik, 26(2), str. 363-367. https://doi.org/10.17559/TV-20171110183526
Vancouver Vasilko K, Murčinková Z. Machining of Wood as a Natural Composite Material. Tehnički vjesnik [Internet]. 2019 [pristupljeno 18.05.2021.];26(2):363-367. https://doi.org/10.17559/TV-20171110183526
IEEE K. Vasilko i Z. Murčinková, "Machining of Wood as a Natural Composite Material", Tehnički vjesnik, vol.26, br. 2, str. 363-367, 2019. [Online]. https://doi.org/10.17559/TV-20171110183526
Sažetak In the paper, the wood as natural fibre-layered composite is used to study the principles of effect in machining of such composites and provide the suggestion how to eliminate the unwanted effects in composite material cutting. The suggestion is not in special tool geometry, cutting tool material, toolpath strategy etc. but is based on basically different principle of machining. The actual research in cutting of composites is focused on orthogonal cutting as 2D process. We have to take into account the 3D behaviour of chip forming, as the workpiece material is non-homogeneous and directionally oriented. Thus, we studied the idea of so-called free cutting or cutting by straight cutting edge. The principles of such cutting were tested on wood as natural fibre - layered composite and the results are presented in the paper.