hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20160601124330

The Study on Influence of the Method of Handling of Measuring Head on Measurement Results Obtained with the Use of a Portable Profilometer

Krzysztof Stępień   ORCID icon orcid.org/0000-0002-4955-5344 ; Kielce University of Technology, Al. 1000-lecia P. P. 7, 25-314 Kielce, Poland
Stefan Talu   ORCID icon orcid.org/0000-0003-1311-7657 ; Technical University of Cluj-Napoca, Faculty of Mechanical Engineering, Department of AET, Discipline of Descriptive Geometry and Engineering Graphics, 103-105 B-dul Muncii St., Cluj-Napoca 400641, Cluj, Romania

Puni tekst: engleski, pdf (758 KB) str. 592-595 preuzimanja: 103* citiraj
APA 6th Edition
Stępień, K. i Talu, S. (2019). The Study on Influence of the Method of Handling of Measuring Head on Measurement Results Obtained with the Use of a Portable Profilometer. Tehnički vjesnik, 26 (3), 592-595. https://doi.org/10.17559/TV-20160601124330
MLA 8th Edition
Stępień, Krzysztof i Stefan Talu. "The Study on Influence of the Method of Handling of Measuring Head on Measurement Results Obtained with the Use of a Portable Profilometer." Tehnički vjesnik, vol. 26, br. 3, 2019, str. 592-595. https://doi.org/10.17559/TV-20160601124330. Citirano 18.11.2019.
Chicago 17th Edition
Stępień, Krzysztof i Stefan Talu. "The Study on Influence of the Method of Handling of Measuring Head on Measurement Results Obtained with the Use of a Portable Profilometer." Tehnički vjesnik 26, br. 3 (2019): 592-595. https://doi.org/10.17559/TV-20160601124330
Harvard
Stępień, K., i Talu, S. (2019). 'The Study on Influence of the Method of Handling of Measuring Head on Measurement Results Obtained with the Use of a Portable Profilometer', Tehnički vjesnik, 26(3), str. 592-595. https://doi.org/10.17559/TV-20160601124330
Vancouver
Stępień K, Talu S. The Study on Influence of the Method of Handling of Measuring Head on Measurement Results Obtained with the Use of a Portable Profilometer. Tehnički vjesnik [Internet]. 2019 [pristupljeno 18.11.2019.];26(3):592-595. https://doi.org/10.17559/TV-20160601124330
IEEE
K. Stępień i S. Talu, "The Study on Influence of the Method of Handling of Measuring Head on Measurement Results Obtained with the Use of a Portable Profilometer", Tehnički vjesnik, vol.26, br. 3, str. 592-595, 2019. [Online]. https://doi.org/10.17559/TV-20160601124330

Sažetak
Portable profilometers are very common in industrial practice. In particular, they are useful if one wants to perform in-situ inspection of surface roughness under industrial conditions. They are usually small and light and owing to that they are portable and this is why they can be applied under industrial conditions. However, there are numerous factors that influence results of in-situ surface roughness measurements. One of such factors is a human error, since the measuring head is usually controlled manually by an operator. The paper presents results of the research aiming at establishing if there is statistically significant difference between results obtained for mechanical or manual handling of measuring head. In the experiments the following parameters were analyzed: Ra, Rq, Rt and RSm.

Ključne riječi
error; manual handling; portable profilometer

Hrčak ID: 220979

URI
https://hrcak.srce.hr/220979

Posjeta: 192 *