hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20161129080137

Influence of a New Tap Drill Geometry on C45 (1.0503) Steel Processing

Adrian Sorin Faur   ORCID icon orcid.org/0000-0003-0824-9188 ; Technical University of Cluj-Napoca-Romania, Manufacturing Engineering Department, Blvd. Muncii, No. 103-105, 400641, Cluj-Napoca, Romania
Marcel Sabin Popa ; Technical University of Cluj-Napoca-Romania, Manufacturing Engineering Department, Blvd. Muncii, No. 103-105, 400641, Cluj-Napoca, Romania
Stefan Sattel ; Gühring oHG, Head of Research and Development Department, Winterlingen Street, No. 12, 72488, Sigmaringen-Laiz, Germany
Florin Milas   ORCID icon orcid.org/0000-0001-7991-3723 ; Technical University of Cluj-Napoca-Romania, Manufacturing Engineering Department, Blvd. Muncii, No. 103-105, 400641, Cluj-Napoca, Romania

Puni tekst: engleski, pdf (3 MB) str. 611-616 preuzimanja: 92* citiraj
APA 6th Edition
Faur, A.S., Popa, M.S., Sattel, S. i Milas, F. (2019). Influence of a New Tap Drill Geometry on C45 (1.0503) Steel Processing. Tehnički vjesnik, 26 (3), 611-616. https://doi.org/10.17559/TV-20161129080137
MLA 8th Edition
Faur, Adrian Sorin, et al. "Influence of a New Tap Drill Geometry on C45 (1.0503) Steel Processing." Tehnički vjesnik, vol. 26, br. 3, 2019, str. 611-616. https://doi.org/10.17559/TV-20161129080137. Citirano 12.11.2019.
Chicago 17th Edition
Faur, Adrian Sorin, Marcel Sabin Popa, Stefan Sattel i Florin Milas. "Influence of a New Tap Drill Geometry on C45 (1.0503) Steel Processing." Tehnički vjesnik 26, br. 3 (2019): 611-616. https://doi.org/10.17559/TV-20161129080137
Harvard
Faur, A.S., et al. (2019). 'Influence of a New Tap Drill Geometry on C45 (1.0503) Steel Processing', Tehnički vjesnik, 26(3), str. 611-616. https://doi.org/10.17559/TV-20161129080137
Vancouver
Faur AS, Popa MS, Sattel S, Milas F. Influence of a New Tap Drill Geometry on C45 (1.0503) Steel Processing. Tehnički vjesnik [Internet]. 2019 [pristupljeno 12.11.2019.];26(3):611-616. https://doi.org/10.17559/TV-20161129080137
IEEE
A.S. Faur, M.S. Popa, S. Sattel i F. Milas, "Influence of a New Tap Drill Geometry on C45 (1.0503) Steel Processing", Tehnički vjesnik, vol.26, br. 3, str. 611-616, 2019. [Online]. https://doi.org/10.17559/TV-20161129080137

Sažetak
The article presents the research of a cutting tap that has a geometry that extends the cutting tool's life by reducing chipping when the tap reverses while still engaged in cutting a thread. It relates to the improvement of a spiral tap which discharges chips toward a shank via a helical flute. The article contains details about the tap geometries and the results obtained in this research, such as: tool life, chips comparison after cutting 1000 threads, surface comparison after processing 1000 threads and torsion moment analysis. Chip removal is an important factor in the process of threading blind holes which influences the life of the tool.

Ključne riječi
chips analysis; tap geometries; tapping problems; thread analysis

Hrčak ID: 220982

URI
https://hrcak.srce.hr/220982

Posjeta: 168 *