hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20180620181128

Ecologically Sustainable Printing: Aspects of Printing Materials

Ivana Bolanča Mirković ; University of Zagreb, Faculty of Graphic Arts, Getaldiceva 2, 10000 Zagreb, Croatia
Goran Medek ; Lana_Karlovačka tiskara, Banija, 127, 47000 Karlovac
Zdenka Bolanča ; Croatian Academy of Engineering, Department of Graphical Engineering, Kaciceva 28, 10000 Zagreb, Croatia

Puni tekst: engleski, pdf (2 MB) str. 662-667 preuzimanja: 107* citiraj
APA 6th Edition
Bolanča Mirković, I., Medek, G. i Bolanča, Z. (2019). Ecologically Sustainable Printing: Aspects of Printing Materials. Tehnički vjesnik, 26 (3), 662-667. https://doi.org/10.17559/TV-20180620181128
MLA 8th Edition
Bolanča Mirković, Ivana, et al. "Ecologically Sustainable Printing: Aspects of Printing Materials." Tehnički vjesnik, vol. 26, br. 3, 2019, str. 662-667. https://doi.org/10.17559/TV-20180620181128. Citirano 16.11.2019.
Chicago 17th Edition
Bolanča Mirković, Ivana, Goran Medek i Zdenka Bolanča. "Ecologically Sustainable Printing: Aspects of Printing Materials." Tehnički vjesnik 26, br. 3 (2019): 662-667. https://doi.org/10.17559/TV-20180620181128
Harvard
Bolanča Mirković, I., Medek, G., i Bolanča, Z. (2019). 'Ecologically Sustainable Printing: Aspects of Printing Materials', Tehnički vjesnik, 26(3), str. 662-667. https://doi.org/10.17559/TV-20180620181128
Vancouver
Bolanča Mirković I, Medek G, Bolanča Z. Ecologically Sustainable Printing: Aspects of Printing Materials. Tehnički vjesnik [Internet]. 2019 [pristupljeno 16.11.2019.];26(3):662-667. https://doi.org/10.17559/TV-20180620181128
IEEE
I. Bolanča Mirković, G. Medek i Z. Bolanča, "Ecologically Sustainable Printing: Aspects of Printing Materials", Tehnički vjesnik, vol.26, br. 3, str. 662-667, 2019. [Online]. https://doi.org/10.17559/TV-20180620181128

Sažetak
Development of non-wood fibers has been one of strategies to ensure a sustainable fiber supply, including plantation management, reforestation and recycling. Some of alternative fibers are algae that can be used as raw material for papermaking. The Shiro Alga Carta papers made from algae in combination with Forest Stewardship Council certified fibers (FSC - fibers) were used for this research. Three offset inks were used in printing: vegetable-based inks with different amount of renewable raw materials and mineral oil - based ink. Three series of prints were made: non-varnished, varnished with water-based dispersion, and varnished with UV cured varnish. The possibility of reusing fibers was determined by methods of re-pulping (loop I, loop II, loop III). The vegetable based ink toward improved structure give bather results in terms of brightness, ink content and dirt count and area compared with the mineral oil-based ink. Something lower brightness gain and ΔERIC is obtained with water-based dispersion overprint samples. The lowest results are obtained for samples overprinted with UV cured varnish. The results of the research contribute to the explanation of paper/ink/varnish interaction on the reuse of the fibers, which takes into the area of the ecological sustainable development.

Ključne riječi
Algae; cardboard; ink; offset printing, recovered fibers; re-pulping; varnish

Hrčak ID: 220989

URI
https://hrcak.srce.hr/220989

Posjeta: 180 *