hrcak mascot   Srce   HID

Original scientific paper
https://doi.org/10.17559/TV-20170920194959

Influence of Cutting Speed and Feed Rate on the Wear of an S-Type Mixed Ceramic Tool in Turning of AISI 4140 Hardened Steel

Jeferson H. W. Nicolodi ; University of Passo Fundo (UPF), School of Engineering and Architecture, BR 285, 99052-900, Passo Fundo, Brazil
Luiz A. Consalter   ORCID icon orcid.org/0000-0003-2409-6134 ; University of Passo Fundo (UPF), School of Engineering and Architecture, BR 285, 99052-900, Passo Fundo, Brazil
Orlando Durán ; Pontificia Universidad Católica de Valparaíso Avenida Los Carrera 01567, Quilpué, Chile
André J. Souza   ORCID icon orcid.org/0000-0001-5649-7333 ; Federal University of Rio Grande do Sul (UFRGS) Department of Mechanical Engineering (DEMEC), Rua sarmento Leite 425, 90050-170, Porto Alegre, Brazil

Fulltext: english, pdf (2 MB) pages 913-919 downloads: 385* cite
APA 6th Edition
Nicolodi, J.H.W., Consalter, L.A., Durán, O. & Souza, A.J. (2019). Influence of Cutting Speed and Feed Rate on the Wear of an S-Type Mixed Ceramic Tool in Turning of AISI 4140 Hardened Steel. Tehnički vjesnik, 26 (4), 913-919. https://doi.org/10.17559/TV-20170920194959
MLA 8th Edition
Nicolodi, Jeferson H. W., et al. "Influence of Cutting Speed and Feed Rate on the Wear of an S-Type Mixed Ceramic Tool in Turning of AISI 4140 Hardened Steel." Tehnički vjesnik, vol. 26, no. 4, 2019, pp. 913-919. https://doi.org/10.17559/TV-20170920194959. Accessed 23 Jun. 2021.
Chicago 17th Edition
Nicolodi, Jeferson H. W., Luiz A. Consalter, Orlando Durán and André J. Souza. "Influence of Cutting Speed and Feed Rate on the Wear of an S-Type Mixed Ceramic Tool in Turning of AISI 4140 Hardened Steel." Tehnički vjesnik 26, no. 4 (2019): 913-919. https://doi.org/10.17559/TV-20170920194959
Harvard
Nicolodi, J.H.W., et al. (2019). 'Influence of Cutting Speed and Feed Rate on the Wear of an S-Type Mixed Ceramic Tool in Turning of AISI 4140 Hardened Steel', Tehnički vjesnik, 26(4), pp. 913-919. https://doi.org/10.17559/TV-20170920194959
Vancouver
Nicolodi JHW, Consalter LA, Durán O, Souza AJ. Influence of Cutting Speed and Feed Rate on the Wear of an S-Type Mixed Ceramic Tool in Turning of AISI 4140 Hardened Steel. Tehnički vjesnik [Internet]. 2019 [cited 2021 June 23];26(4):913-919. https://doi.org/10.17559/TV-20170920194959
IEEE
J.H.W. Nicolodi, L.A. Consalter, O. Durán and A.J. Souza, "Influence of Cutting Speed and Feed Rate on the Wear of an S-Type Mixed Ceramic Tool in Turning of AISI 4140 Hardened Steel", Tehnički vjesnik, vol.26, no. 4, pp. 913-919, 2019. [Online]. https://doi.org/10.17559/TV-20170920194959

Abstracts
In this study, the performance and the useful life of a mixed ceramic tool with S-type edge microgeometry are evaluated for the case of dry turning of AISI 4140 steel hardened to 55 HRC. The influence of the cutting speed and feed rate of the cutting parameters on the tool failure was investigated. The experiments were designed and analysed using the complete factorial design technique. Our results indicate that the cutting speed and feed rate values exert significant influence on the tool lifespan. Crater and flank wear occur in all cutting conditions. The predominant tool wear mechanisms are diffusion, abrasion, and adhesion, which are also known as attrition. The tool life curve and equation were established for the machining conditions of this investigation to achieve the subsequent optimisation of this process.

Keywords
ceramic tool; cutting parameters; tool wear and life; hardened steel turning

Hrčak ID: 223278

URI
https://hrcak.srce.hr/223278

Visits: 728 *