Skoči na glavni sadržaj

Stručni rad

https://doi.org/10.17559/TV-20180404124654

Repair and Strengthening of Timber Floors of Pančevo Diocese by Timber–Concrete Coupling Technique

Radovan Cvetković orcid id orcid.org/0000-0002-8462-7235 ; Faculty of Civil Engineering and Architecture, University of Niš, Aleksandar Medvedev Street 14, 18000 Niš, Serbia
Dragoslav Stojić ; Faculty of Civil Engineering and Architecture, University of Niš, Aleksandar Medvedev Street 14, 18000 Niš, Serbia
Nemanja Marković ; Faculty of Civil Engineering and Architecture, University of Niš, Aleksandar Medvedev Street 14, 18000 Niš, Serbia / Faculty of Civil and Environmental Engineering, Ruhr University Bochum, Universitatsstrasse 150, 44801 Bochum, Germany
Marina Trajković orcid id orcid.org/0000-0001-6874-758X ; Faculty of Civil Engineering and Architecture, University of Niš, Aleksandar Medvedev Street 14, 18000 Niš, Serbia
Darko Živković ; Faculty of Civil Engineering and Architecture, University of Niš, Aleksandar Medvedev Street 14, 18000 Niš, Serbia


Puni tekst: engleski pdf 3.043 Kb

str. 1191-1198

preuzimanja: 634

citiraj


Sažetak

The building of Diocese is located in the very center of Pančevo, at the very corner of the City Park. The object is of a great historic and cultural importance and it has been already in use for two centuries. The object was built in the masonry system, using stones and bricks for the walls, and timber for the floor and roof structure. This paper gives the description of repair and reconstruction of timber floors of 6,5m, by coupling timber and concrete technique. The detailed design concept is shown, based on the theory of coupling elasticity and the concepts of ultimate and serviceability limit state of timber structures (Eurocode 5). For the accepted design model, its numerical verification was carried out by the proper simulation in software ABAQUS 6.11. For timber, concrete and adopted fasteners for their coupling, certain laws of material behaving were adopted, as well as their evaluated and proved mechanical characteristics. All this was done to carry out design procedure. The obtained comparative results were presented, from the aspect of nonlinear stress strain analysis in characteristic sections and zones of applied design model. Finally, a short review of reconstruction based on the previous theoretical-analytical observations was given.

Ključne riječi

coupling timber and concrete; diocese; numerical simulation; repair; strengthening; timber floors

Hrčak ID:

223346

URI

https://hrcak.srce.hr/223346

Datum izdavanja:

25.7.2019.

Posjeta: 1.301 *