hrcak mascot   Srce   HID

Izvorni znanstveni članak

Enhancing hardness and wear resistance of ZrSiO4-SnO2/Cu10Sn composite produced by warm compaction and sintering

I. A. Wahyudie   ORCID icon orcid.org/0000-0001-8256-9986 ; Politeknik Manufaktur Negeri Bangka Belitung, Indonesia
R. Soenoko ; Mechanical Engineering Department, Brawijaya University, Indonesia
W. Suprapto ; Mechanical Engineering Department, Brawijaya University, Indonesia
Y. S. Irawan   ORCID icon orcid.org/0000-0001-7593-8931 ; Mechanical Engineering Department, Brawijaya University, Indonesia

Puni tekst: engleski, pdf (313 KB) str. 27-30 preuzimanja: 14* citiraj
APA 6th Edition
Wahyudie, I.A., Soenoko, R., Suprapto, W. i Irawan, Y.S. (2020). Enhancing hardness and wear resistance of ZrSiO4-SnO2/Cu10Sn composite produced by warm compaction and sintering . Metalurgija, 59 (1), 27-30. Preuzeto s https://hrcak.srce.hr/224746
MLA 8th Edition
Wahyudie, I. A., et al. "Enhancing hardness and wear resistance of ZrSiO4-SnO2/Cu10Sn composite produced by warm compaction and sintering ." Metalurgija, vol. 59, br. 1, 2020, str. 27-30. https://hrcak.srce.hr/224746. Citirano 23.10.2019.
Chicago 17th Edition
Wahyudie, I. A., R. Soenoko, W. Suprapto i Y. S. Irawan. "Enhancing hardness and wear resistance of ZrSiO4-SnO2/Cu10Sn composite produced by warm compaction and sintering ." Metalurgija 59, br. 1 (2020): 27-30. https://hrcak.srce.hr/224746
Harvard
Wahyudie, I.A., et al. (2020). 'Enhancing hardness and wear resistance of ZrSiO4-SnO2/Cu10Sn composite produced by warm compaction and sintering ', Metalurgija, 59(1), str. 27-30. Preuzeto s: https://hrcak.srce.hr/224746 (Datum pristupa: 23.10.2019.)
Vancouver
Wahyudie IA, Soenoko R, Suprapto W, Irawan YS. Enhancing hardness and wear resistance of ZrSiO4-SnO2/Cu10Sn composite produced by warm compaction and sintering . Metalurgija [Internet]. 2020 [pristupljeno 23.10.2019.];59(1):27-30. Dostupno na: https://hrcak.srce.hr/224746
IEEE
I.A. Wahyudie, R. Soenoko, W. Suprapto i Y.S. Irawan, "Enhancing hardness and wear resistance of ZrSiO4-SnO2/Cu10Sn composite produced by warm compaction and sintering ", Metalurgija, vol.59, br. 1, str. 27-30, 2020. [Online]. Dostupno na: https://hrcak.srce.hr/224746. [Citirano: 23.10.2019.]

Sažetak
This research focuses on improving the hardness and wear resistance of ZrSiO4- SnO2/Cu10Sn composite. In this investigation, the SnO2 tailing sand dominated by ZrSiO4 and SnO2 was used for the reinforcement. The Cu10Sn composites with 0, 5, 10, 15 and 20 weight % SnO2 tailing sand were produced using double action warm compaction followed by sintering. The results show that the highest hardness value and the lowest wear rate of the composites were achieved by adding 15 weight % of SnO2 tailing sand. Moreover, the wear rate of Cu10Sn matrix composite exhibits a decrease significantly with an increase in the amount of SnO2 tailing sand due to the presence of hard particles.

Ključne riječi
ZrSiO4-SnO2/Cu10Sn; double warm compaction; sintering; hardness; wear resistance

Hrčak ID: 224746

URI
https://hrcak.srce.hr/224746

Posjeta: 29 *