hrcak mascot   Srce   HID

Izvorni znanstveni članak

Prediction and analysis of electric discharge machining (EDM) die sinking machining of PH 15-5 stainless steel by using taguchi approach

G. Balamurugan   ORCID icon orcid.org/0000-0002-2800-0841 ; Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore, India
R. Sivasubramanian ; Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore, India

Puni tekst: engleski, pdf (664 KB) str. 67-70 preuzimanja: 19* citiraj
APA 6th Edition
Balamurugan, G. i Sivasubramanian, R. (2020). Prediction and analysis of electric discharge machining (EDM) die sinking machining of PH 15-5 stainless steel by using taguchi approach. Metalurgija, 59 (1), 67-70. Preuzeto s https://hrcak.srce.hr/224762
MLA 8th Edition
Balamurugan, G. i R. Sivasubramanian. "Prediction and analysis of electric discharge machining (EDM) die sinking machining of PH 15-5 stainless steel by using taguchi approach." Metalurgija, vol. 59, br. 1, 2020, str. 67-70. https://hrcak.srce.hr/224762. Citirano 21.10.2019.
Chicago 17th Edition
Balamurugan, G. i R. Sivasubramanian. "Prediction and analysis of electric discharge machining (EDM) die sinking machining of PH 15-5 stainless steel by using taguchi approach." Metalurgija 59, br. 1 (2020): 67-70. https://hrcak.srce.hr/224762
Harvard
Balamurugan, G., i Sivasubramanian, R. (2020). 'Prediction and analysis of electric discharge machining (EDM) die sinking machining of PH 15-5 stainless steel by using taguchi approach', Metalurgija, 59(1), str. 67-70. Preuzeto s: https://hrcak.srce.hr/224762 (Datum pristupa: 21.10.2019.)
Vancouver
Balamurugan G, Sivasubramanian R. Prediction and analysis of electric discharge machining (EDM) die sinking machining of PH 15-5 stainless steel by using taguchi approach. Metalurgija [Internet]. 2020 [pristupljeno 21.10.2019.];59(1):67-70. Dostupno na: https://hrcak.srce.hr/224762
IEEE
G. Balamurugan i R. Sivasubramanian, "Prediction and analysis of electric discharge machining (EDM) die sinking machining of PH 15-5 stainless steel by using taguchi approach", Metalurgija, vol.59, br. 1, str. 67-70, 2020. [Online]. Dostupno na: https://hrcak.srce.hr/224762. [Citirano: 21.10.2019.]

Sažetak
EDM is effectively used in many application like aerospace, turbine, medical and etc., due to its non-contact process between work piece and tool. In this study, the important machining process parameters such as peak current, pulse on time, pulse off time and fluid pressure are inspected that incitement to distress the performance of the operation Material removal rate (MRR) and Tool wear rate (TWR). Subsequently tool geometry and materials that are predominantly affect the work piece response factor as Surface roughness (SR). Hence copper electrode with coating of brass material and different tool geometry are also considered. PH15-5 stainless steel precipitated hardening steel was machined up to 5 mm depth with EDM die sinking machine using 27 number of experiments designed.

Ključne riječi
EDM; PH15-5; mathematical model; microstructure; Taguchi method

Hrčak ID: 224762

URI
https://hrcak.srce.hr/224762

Posjeta: 35 *