Skoči na glavni sadržaj

Prethodno priopćenje

https://doi.org/10.14256/JCE.2469.2018

Effect of various curing methods and addition of silica aerogel on mortar properties

Levent Bostancı
Ozlem Ustundag
Ozlem Celik Sola
Mucteba Uysal


Puni tekst: hrvatski pdf 368 Kb

str. 651-661

preuzimanja: 300

citiraj

Puni tekst: engleski pdf 366 Kb

str. 651-661

preuzimanja: 360

citiraj


Sažetak

Mechanical and thermal properties and porosity of aerogel-incorporated mortars exposed to various curing conditions (curing by wetting-drying, curing by magnesium sulphate (MgSO4), and water curing) are experimentally investigated in this study. Maximum compressive strengths at 0.5 % aerogel content under the effects of wetting-drying and MgSO4 curing conditions amounted to 60.8 MPa and 44.3 MPa, respectively. In addition, compared to the other curing methods, the gel pores formation in mortars exposed to MgSO4 effects increased with an increase in aerogel content.

Ključne riječi

aerogel; wetting–drying effect; magnesium sulphate effect; thermal conductivity; pore structure

Hrčak ID:

225351

URI

https://hrcak.srce.hr/225351

Datum izdavanja:

29.8.2019.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.289 *