hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.5552/drvind.2019.1821

The Effect of Mat Layers Moisture Content on Some Properties of Particleboard

Abdullah Istek ; Bartin University, Faculty of Forestry, Department of Forest Industrial Engineering, Bartin, Turkey
Ufuk Aydin ; Kastamonu Integrated Particleboard Factory, Turkey
Ismail Ozlusoylu ; Bartin University, Faculty of Forestry, Department of Forest Industrial Engineering, Bartin, Turkey

Puni tekst: engleski, pdf (451 KB) str. 221-228 preuzimanja: 248* citiraj
APA 6th Edition
Istek, A., Aydin, U. i Ozlusoylu, I. (2019). The Effect of Mat Layers Moisture Content on Some Properties of Particleboard. Drvna industrija, 70 (3), 221-228. https://doi.org/10.5552/drvind.2019.1821
MLA 8th Edition
Istek, Abdullah, et al. "The Effect of Mat Layers Moisture Content on Some Properties of Particleboard." Drvna industrija, vol. 70, br. 3, 2019, str. 221-228. https://doi.org/10.5552/drvind.2019.1821. Citirano 22.06.2021.
Chicago 17th Edition
Istek, Abdullah, Ufuk Aydin i Ismail Ozlusoylu. "The Effect of Mat Layers Moisture Content on Some Properties of Particleboard." Drvna industrija 70, br. 3 (2019): 221-228. https://doi.org/10.5552/drvind.2019.1821
Harvard
Istek, A., Aydin, U., i Ozlusoylu, I. (2019). 'The Effect of Mat Layers Moisture Content on Some Properties of Particleboard', Drvna industrija, 70(3), str. 221-228. https://doi.org/10.5552/drvind.2019.1821
Vancouver
Istek A, Aydin U, Ozlusoylu I. The Effect of Mat Layers Moisture Content on Some Properties of Particleboard. Drvna industrija [Internet]. 2019 [pristupljeno 22.06.2021.];70(3):221-228. https://doi.org/10.5552/drvind.2019.1821
IEEE
A. Istek, U. Aydin i I. Ozlusoylu, "The Effect of Mat Layers Moisture Content on Some Properties of Particleboard", Drvna industrija, vol.70, br. 3, str. 221-228, 2019. [Online]. https://doi.org/10.5552/drvind.2019.1821

Sažetak
In this study, the effect of mat moisture content on the physical and mechanical properties of particleboard was investigated. The experimental boards were produced by using 40 % softwood, 45 % hardwood chips, and 15 % sawdust. The formaldehyde resin/adhesive was used in three-layers (bottom-top layer 12 %, core layer 8 %). Multi-opening press was used during manufacturing the experimental particleboards. The physical and mechanical properties of boards obtained were identified according to the TS-EN standards. The optimum core layer moisture content was determined as 6 % and 7 % according to the results, whereas the moisture content of bottom and top layers was 14 %. Under these moisture content conditions, the bending strength was found to be 13.3 N/mm², the modulus of elasticity in bending 2466 N/mm², and internal bonding strength 0.44 N/mm². The optimum bottom-top layer moisture content was determined to be between 13 % and 15 % and 6.5 % for the core layer.

Ključne riječi
wood-based panels; particleboard; mat moisture content; properties

Hrčak ID: 225624

URI
https://hrcak.srce.hr/225624

[hrvatski]

Posjeta: 507 *