hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20190215172608

Dynamic Model and Analysis of a Sucker-rod Pump Injection-production System

Jiang Minzheng ; School of Mechanical Science and Engineering, Northeast Petroleum University, Daqing, China, 163318
Zhang Deshi ; School of Mechanical Science and Engineering, Northeast Petroleum University, Daqing, China, 163318
Feng Zi-Ming ; School of Mechanical Science and Engineering, Northeast Petroleum University, Daqing, China, 163318
Duan Tianyu ; Daqing Oilfied Tianyu Engineering Design Co., LTD, Daqing, China, 163712

Puni tekst: engleski, pdf (1 MB) str. 1451-1460 preuzimanja: 36* citiraj
APA 6th Edition
Minzheng, J., Deshi, Z., Zi-Ming, F. i Tianyu, D. (2019). Dynamic Model and Analysis of a Sucker-rod Pump Injection-production System. Tehnički vjesnik, 26 (5), 1451-1460. https://doi.org/10.17559/TV-20190215172608
MLA 8th Edition
Minzheng, Jiang, et al. "Dynamic Model and Analysis of a Sucker-rod Pump Injection-production System." Tehnički vjesnik, vol. 26, br. 5, 2019, str. 1451-1460. https://doi.org/10.17559/TV-20190215172608. Citirano 15.11.2019.
Chicago 17th Edition
Minzheng, Jiang, Zhang Deshi, Feng Zi-Ming i Duan Tianyu. "Dynamic Model and Analysis of a Sucker-rod Pump Injection-production System." Tehnički vjesnik 26, br. 5 (2019): 1451-1460. https://doi.org/10.17559/TV-20190215172608
Harvard
Minzheng, J., et al. (2019). 'Dynamic Model and Analysis of a Sucker-rod Pump Injection-production System', Tehnički vjesnik, 26(5), str. 1451-1460. https://doi.org/10.17559/TV-20190215172608
Vancouver
Minzheng J, Deshi Z, Zi-Ming F, Tianyu D. Dynamic Model and Analysis of a Sucker-rod Pump Injection-production System. Tehnički vjesnik [Internet]. 2019 [pristupljeno 15.11.2019.];26(5):1451-1460. https://doi.org/10.17559/TV-20190215172608
IEEE
J. Minzheng, Z. Deshi, F. Zi-Ming i D. Tianyu, "Dynamic Model and Analysis of a Sucker-rod Pump Injection-production System", Tehnički vjesnik, vol.26, br. 5, str. 1451-1460, 2019. [Online]. https://doi.org/10.17559/TV-20190215172608

Sažetak
Injection and production at the same oil well is an effective way to achieve stable production and control water-cut. A sucker-rod pump injection-production system is composed of a production pump, piston seal, injection pump, and so on. It separates oil and water down the well hole using gravity, then injects the water directly into the formation while the concentrated oil is brought to the surface. To explore the complex forces involved in the system, static and dynamic models of the injection pump, sealed piston and production pump are established from the bottom up based on the mechanical method, and a solution is established using the difference method. Finally, a dynamic simulation of the system is compiled in Visual Basic V6.0, and the correctness and practicality of the simulation are verified by field measurements.

Ključne riječi
dynamic model; injection-production system; Gibbs model; sucker-rod pump

Hrčak ID: 226043

URI
https://hrcak.srce.hr/226043

Posjeta: 73 *