Pregledni rad

https://doi.org/10.17559/TV-20180113134742

Study on the End Winding Inductance of Three-Phase Windings in Two Layers

Olivian Chiver orcid.org/0000-0003-3540-3099 ; Technical University of Cluj-Napoca, Victor Babes, 62A, RO-430083 Baia Mare, Romania
Liviu Neamt ; Technical University of Cluj-Napoca, Victor Babes, 62A, RO-430083 Baia Mare, Romania
Cristian Barz ; Technical University of Cluj-Napoca, Victor Babes, 62A, RO-430083 Baia Mare, Romania
Eleonora Pop ; Technical University of Cluj-Napoca, Victor Babes, 62A, RO-430083 Baia Mare, Romania
Cristinel Costea orcid.org/0000-0002-1101-6652 ; Technical University of Cluj-Napoca, Victor Babes, 62A, RO-430083 Baia Mare, Romania
Zoltan Erdei ; Technical University of Cluj-Napoca, Victor Babes, 62A, RO-430083 Baia Mare, Romania

Sažetak

This work addresses the issue of the accuracy with which the stator end winding inductance of A.C. machines is determined in the design stage. Only two-layer windings having a shortened pitch are treated in this paper. The end winding inductance was calculated by determining the distribution of the magnetic field, performing numerical analyses based on finite elements method (FEM).The manner of how the inductances are determined using the analysis results is described in the paper. For validating the procedure, comparisons between FEM results and laboratory tests were performed in case of one of the studied machine. There is a very good correlation between the results. Then, a comparative FEM-Analytical study was carried out. Own program was used to design and build the models necessary in the study. Based on about 130 models, some important conclusions have been depicted.

Ključne riječi

A.C. machine; end winding inductance; FEM; two layers

Hrčak ID:

226052

URI

https://hrcak.srce.hr/226052

Datum izdavanja:

8.10.2019.

Posjeta: 2.357 *