hrcak mascot   Srce   HID

Izvorni znanstveni članak
https://doi.org/10.31803/tg-20191029125530

The influence of pre-treatment by priming on the CMY reproduction quality printed with ElectroInk

Marko Morić* ; University North, Multimedia, Design and Application, Jurja Križanića 31b, 42000 Varaždin, Croatia
Igor Majnarić   ORCID icon orcid.org/0000-0002-4447-8140 ; University of Zagreb, Faculty of Graphic Arts, Getaldićeva 2, 10000 Zagreb, Croatia
Klaudio Pap ; University of Zagreb, Faculty of Graphic Arts, Getaldićeva 2, 10000 Zagreb, Croatia
Slaven Miloš ; Grafiknet ltd. Odranska 1/1, 10000 Zagreb, Croatia

Puni tekst: engleski, pdf (2 MB) str. 305-310 preuzimanja: 189* citiraj
APA 6th Edition
Morić*, M., Majnarić, I., Pap, K. i Miloš, S. (2019). The influence of pre-treatment by priming on the CMY reproduction quality printed with ElectroInk. Tehnički glasnik, 13 (4), 305-310. https://doi.org/10.31803/tg-20191029125530
MLA 8th Edition
Morić*, Marko, et al. "The influence of pre-treatment by priming on the CMY reproduction quality printed with ElectroInk." Tehnički glasnik, vol. 13, br. 4, 2019, str. 305-310. https://doi.org/10.31803/tg-20191029125530. Citirano 25.06.2021.
Chicago 17th Edition
Morić*, Marko, Igor Majnarić, Klaudio Pap i Slaven Miloš. "The influence of pre-treatment by priming on the CMY reproduction quality printed with ElectroInk." Tehnički glasnik 13, br. 4 (2019): 305-310. https://doi.org/10.31803/tg-20191029125530
Harvard
Morić*, M., et al. (2019). 'The influence of pre-treatment by priming on the CMY reproduction quality printed with ElectroInk', Tehnički glasnik, 13(4), str. 305-310. https://doi.org/10.31803/tg-20191029125530
Vancouver
Morić* M, Majnarić I, Pap K, Miloš S. The influence of pre-treatment by priming on the CMY reproduction quality printed with ElectroInk. Tehnički glasnik [Internet]. 2019 [pristupljeno 25.06.2021.];13(4):305-310. https://doi.org/10.31803/tg-20191029125530
IEEE
M. Morić*, I. Majnarić, K. Pap i S. Miloš, "The influence of pre-treatment by priming on the CMY reproduction quality printed with ElectroInk", Tehnički glasnik, vol.13, br. 4, str. 305-310, 2019. [Online]. https://doi.org/10.31803/tg-20191029125530

Sažetak
In order to achieve high-quality colour prints by using an electrophotography printing machine, it is necessary to prepare the printing substrate. Additional treatment may be needed to achieve the better substrate surface tension for optimally attaching the liquid electrophotography ink to the fine art paper. To ensure good adhesion of the ink to the printing substrate, a pre-treatment by application of surface tension regulating fluids (priming) may be used. In this paper, we will determine the possibility of realization of the CMY prints and the possibility of achieving an increased range of tone value in electrophotography digital printing. Based on the results, the new possible values of reproduced CMY tones will be determined so that a higher print quality can be achieved. The application of primers changes the optical properties of the paper printing substrate, which directly affects the colour reproduction. An additional 100 % increase of primer application will result in total colour changes of ΔEC (0,5g/m2 & 1g/m2) = 0,06, ΔEM (0,5g/m2 & 1g/m2) = 0,42, ΔEY (0,5g/m2 & 1g/m2) = 0,08. In this scenario, 1 g/m2 application of primer will produce the most intense full tones and therefore the highest quality prints for all three ElectroInk process colours.

Ključne riječi
CIELab; colour difference; digital colour offset; ElectroInk; in-line primer; pre-treatment

Hrčak ID: 229499

URI
https://hrcak.srce.hr/229499

Posjeta: 338 *