Skoči na glavni sadržaj

Prethodno priopćenje

https://doi.org/10.31803/tg-20181206210501

Designing plaster mortar for a high-rise building

Zeljko Kos* orcid id orcid.org/0000-0002-4953-907X ; University North, University Centre of Varaždin, 104. brigade 3, 42000 Varazdin, Croatia
Valentyn Paruta ; Odessa State Academy of Civil Engineering and Architecture, 4, Didrikhson str., Odesa, Ukraine
Olga Gnyp ; Odessa State Academy of Civil Engineering and Architecture, 4, Didrikhson str., Odesa, Ukraine
Leonid Lavrenyuk ; Odessa State Academy of Civil Engineering and Architecture, 4, Didrikhson str., Odesa, Ukraine
Iryna Grynyova orcid id orcid.org/0000-0001-7637-6029 ; Odessa State Academy of Civil Engineering and Architecture, 4, Didrikhson str., Odesa, Ukraine


Puni tekst: engleski pdf 1.354 Kb

str. 331-336

preuzimanja: 561

citiraj


Sažetak

The article rethinks the approach to the development of compositions of plaster mortar as the load on the plaster coating located on the 1st or 24th floor of the building differs significantly. To solve the problem within the framework of existing concepts, principles and regulatory requirements are not possible, as they are applicable to the solutions used in low-rise building. To achieve this goal, it is necessary to develop the scientific basis for the design of plaster mortar. In order to do that, it is necessary to analyze the processes occurring in the plaster coating when it is applied and hardened, the knowledge of the mechanism of the destruction of the "masonry - plaster coating" system, and the calculation and evaluation of stresses. The designated physical and mechanical parameters and the selected plaster mortar compositions should ensure the "work" of the system at the maximum level of such stresses.

Ključne riječi

calculation of stresses; high-rise building; mechanical parameters; physical parameters; plaster mortar

Hrčak ID:

229503

URI

https://hrcak.srce.hr/229503

Datum izdavanja:

11.12.2019.

Posjeta: 1.059 *