hrcak mascot   Srce   HID

Prethodno priopćenje
https://doi.org/10.31803/tg-20191102120738

Analysis of thermomechanical properties of polymeric materials produced by a 3D printing method

Adam Gnatowski ; Czestochowa University of Technology, Department of Technology and Automation, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland
Rafał Gołębski* ; Czestochowa University of Technology, Department of Technology and Automation, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland
Piotr Sikora ; Czestochowa University of Technology, Department of Technology and Automation, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland

Puni tekst: engleski, pdf (1 MB) str. 343-348 preuzimanja: 226* citiraj
APA 6th Edition
Gnatowski, A., Gołębski*, R. i Sikora, P. (2019). Analysis of thermomechanical properties of polymeric materials produced by a 3D printing method. Tehnički glasnik, 13 (4), 343-348. https://doi.org/10.31803/tg-20191102120738
MLA 8th Edition
Gnatowski, Adam, et al. "Analysis of thermomechanical properties of polymeric materials produced by a 3D printing method." Tehnički glasnik, vol. 13, br. 4, 2019, str. 343-348. https://doi.org/10.31803/tg-20191102120738. Citirano 19.06.2021.
Chicago 17th Edition
Gnatowski, Adam, Rafał Gołębski* i Piotr Sikora. "Analysis of thermomechanical properties of polymeric materials produced by a 3D printing method." Tehnički glasnik 13, br. 4 (2019): 343-348. https://doi.org/10.31803/tg-20191102120738
Harvard
Gnatowski, A., Gołębski*, R., i Sikora, P. (2019). 'Analysis of thermomechanical properties of polymeric materials produced by a 3D printing method', Tehnički glasnik, 13(4), str. 343-348. https://doi.org/10.31803/tg-20191102120738
Vancouver
Gnatowski A, Gołębski* R, Sikora P. Analysis of thermomechanical properties of polymeric materials produced by a 3D printing method. Tehnički glasnik [Internet]. 2019 [pristupljeno 19.06.2021.];13(4):343-348. https://doi.org/10.31803/tg-20191102120738
IEEE
A. Gnatowski, R. Gołębski* i P. Sikora, "Analysis of thermomechanical properties of polymeric materials produced by a 3D printing method", Tehnički glasnik, vol.13, br. 4, str. 343-348, 2019. [Online]. https://doi.org/10.31803/tg-20191102120738

Sažetak
A comparative analysis of the thermomechanical properties of semicrystalline and amorphous polymeric materials was carried out. Samples were produced by using a 3D printing technology on the SIGNAL printer - ATMAT. The following polymeric materials were used to make the samples: TPU-thermoplastic polyurethane elastomer, ABS-copolymer acrylonitrile-butadiene-styrene, Nosewood, PET-ethylene terephthalate, PLA-poly (lactic acid). The research included a thermal analysis of the dynamic properties (DMTA) of manufactured materials.

Ključne riječi
polymer materials; thermal analysis of dynamic properties; 3D print

Hrčak ID: 229505

URI
https://hrcak.srce.hr/229505

Posjeta: 408 *