Skoči na glavni sadržaj

Prethodno priopćenje

https://doi.org/10.31803/tg-20191102120738

Analysis of thermomechanical properties of polymeric materials produced by a 3D printing method

Adam Gnatowski ; Czestochowa University of Technology, Department of Technology and Automation, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland
Rafał Gołębski* ; Czestochowa University of Technology, Department of Technology and Automation, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland
Piotr Sikora ; Czestochowa University of Technology, Department of Technology and Automation, Al. Armii Krajowej 21, 42-201 Czestochowa, Poland


Puni tekst: engleski pdf 1.484 Kb

str. 343-348

preuzimanja: 495

citiraj


Sažetak

A comparative analysis of the thermomechanical properties of semicrystalline and amorphous polymeric materials was carried out. Samples were produced by using a 3D printing technology on the SIGNAL printer - ATMAT. The following polymeric materials were used to make the samples: TPU-thermoplastic polyurethane elastomer, ABS-copolymer acrylonitrile-butadiene-styrene, Nosewood, PET-ethylene terephthalate, PLA-poly (lactic acid). The research included a thermal analysis of the dynamic properties (DMTA) of manufactured materials.

Ključne riječi

polymer materials; thermal analysis of dynamic properties; 3D print

Hrčak ID:

229505

URI

https://hrcak.srce.hr/229505

Datum izdavanja:

11.12.2019.

Posjeta: 1.079 *