hrcak mascot   Srce   HID

Preliminary communication

Structure formation of aluminum alloy D16 while rolling bars in the radial shear mill

S. A. Mashekov   ORCID icon orcid.org/0000-0002-9577-2219 ; Kazakh National Technical University, Almaty, Kazakhstan
G. A. Smailova   ORCID icon orcid.org/0000-0003-2293-6232 ; Kazakh Agrarian University, Almaty, Kazakhstan
A. M. Alshynova ; Almaty Technological University, Almaty, Kazakhstan
A. E. Uderbayeva ; Almaty Technological University, Almaty, Kazakhstan
N. S. Sembaev ; Pavlodar State University, Pavlodar, Kazakhstan
A. Zhauyt   ORCID icon orcid.org/0000-0003-3905-6928 ; Almaty University of Power Engineering and Telecommunications, Almaty, Kazakhstan

Fulltext: english, pdf (414 KB) pages 195-198 downloads: 86* cite
APA 6th Edition
Mashekov, S.A., Smailova, G.A., Alshynova, A.M., Uderbayeva, A.E., Sembaev, N.S. & Zhauyt, A. (2020). Structure formation of aluminum alloy D16 while rolling bars in the radial shear mill. Metalurgija, 59 (2), 195-198. Retrieved from https://hrcak.srce.hr/232468
MLA 8th Edition
Mashekov, S. A., et al. "Structure formation of aluminum alloy D16 while rolling bars in the radial shear mill." Metalurgija, vol. 59, no. 2, 2020, pp. 195-198. https://hrcak.srce.hr/232468. Accessed 20 Oct. 2020.
Chicago 17th Edition
Mashekov, S. A., G. A. Smailova, A. M. Alshynova, A. E. Uderbayeva, N. S. Sembaev and A. Zhauyt. "Structure formation of aluminum alloy D16 while rolling bars in the radial shear mill." Metalurgija 59, no. 2 (2020): 195-198. https://hrcak.srce.hr/232468
Harvard
Mashekov, S.A., et al. (2020). 'Structure formation of aluminum alloy D16 while rolling bars in the radial shear mill', Metalurgija, 59(2), pp. 195-198. Available at: https://hrcak.srce.hr/232468 (Accessed 20 October 2020)
Vancouver
Mashekov SA, Smailova GA, Alshynova AM, Uderbayeva AE, Sembaev NS, Zhauyt A. Structure formation of aluminum alloy D16 while rolling bars in the radial shear mill. Metalurgija [Internet]. 2020 [cited 2020 October 20];59(2):195-198. Available from: https://hrcak.srce.hr/232468
IEEE
S.A. Mashekov, G.A. Smailova, A.M. Alshynova, A.E. Uderbayeva, N.S. Sembaev and A. Zhauyt, "Structure formation of aluminum alloy D16 while rolling bars in the radial shear mill", Metalurgija, vol.59, no. 2, pp. 195-198, 2020. [Online]. Available: https://hrcak.srce.hr/232468. [Accessed: 20 October 2020]

Abstracts
This article presents a new method of obtaining bars from aluminum alloys D16 with ultrafine-grained (UFG) structure. The ultrafine-grained structure is obtained by implementing severe plastic deformation developed by a radialshear mill (RSM). This paper investigates the stress-strain state (SSS) of the workpiece during rolling in a radial-shear mill. The (FEM) and the MSC Super Forge program allowed us to obtain quantitative data and establish the main laws of the distribution of SSS and temperature while modeling the rolling in the RSM. The rational technology of rolling aluminum alloy D16 was developed and tested in laboratory conditions. Particular attention is paid to the analysis of the effect of rolling conditions in the RSM on the formation of UFG structures in the aluminum alloy D16.

Keywords
aluminum alloys; rolling on a radial-shear mill; temperature; intensity of stresses and strains; ultrafinegrained structure

Hrčak ID: 232468

URI
https://hrcak.srce.hr/232468

Visits: 146 *